MCOR issue

Fraze · 06-03-2014, 09:25 PM

Thanks guys .Appreciate all the info. Dealer is sending an MCOR4 up and I'll switch it out .All other parts mentioned already replaced. If continues to quit , I'll make the trip to dealer with it . (250 miles-450km)
Thanks again .
Lots of failures on the 2012 and 2013 cars with the mcor 3, needs to be changed to the mcor 4.
The IQDM doesn't show the failure in the history anymore.It will show a HPD only and not a throttle fault.The dealer needs to drive it for it to fail and see the foot input shows its off when your foot is on the pedal. Its under warranty so the dealer needs to replace it.Club Car knows the mcor 3 is a faulty part.

Fraze · 06-03-2014, 09:30 PM

Thanks Guys for all the info.Great thread on this website.
Dealer sending up an MCOR4 and I will replace as I'm 300 miles from closest dealer.
If that doesn't do it , I'll take it down as all other mentioned parts are replaced already (mistook OBC , for On Board Computer)

Thanks again , will update in few weeks to let you know if alls well.

Fraze · 06-17-2014, 09:01 PM

Replaced the MCOR 3 with an MCOR 4 about a week ago. have 5 rounds in and no issues so far. Will keep u posted and thanks for the help.

Fraze · 06-25-2014, 05:49 PM

Replaced MCOR 3 with MCOR 4

15 rounds , no issues ... running well. Thanks for the help guys !

TahoeDawgZ71 · 06-25-2014, 09:32 PM

Quote:

Originally Posted by Fraze

Replaced MCOR 3 with MCOR 4

15 rounds , no issues ... running well. Thanks for the help guys !

06-03-2014, 09:25 PM	#11
Fraze Not Yet Wild Join Date: May 2014 Location: N.Alberta Posts: 6	Re: MCOR issue Thanks guys .Appreciate all the info. Dealer is sending an MCOR4 up and I'll switch it out .All other parts mentioned already replaced. If continues to quit , I'll make the trip to dealer with it . (250 miles-450km) Thanks again . Lots of failures on the 2012 and 2013 cars with the mcor 3, needs to be changed to the mcor 4. The IQDM doesn't show the failure in the history anymore.It will show a HPD only and not a throttle fault.The dealer needs to drive it for it to fail and see the foot input shows its off when your foot is on the pedal. Its under warranty so the dealer needs to replace it.Club Car knows the mcor 3 is a faulty part.

06-03-2014, 09:30 PM	#12
Fraze Not Yet Wild Join Date: May 2014 Location: N.Alberta Posts: 6	Re: MCOR issue Thanks Guys for all the info.Great thread on this website. Dealer sending up an MCOR4 and I will replace as I'm 300 miles from closest dealer. If that doesn't do it , I'll take it down as all other mentioned parts are replaced already (mistook OBC , for On Board Computer) Thanks again , will update in few weeks to let you know if alls well.

06-17-2014, 09:01 PM	#13
Fraze Not Yet Wild Join Date: May 2014 Location: N.Alberta Posts: 6	Re: MCOR issue Replaced the MCOR 3 with an MCOR 4 about a week ago. have 5 rounds in and no issues so far. Will keep u posted and thanks for the help.

06-25-2014, 05:49 PM	#14
Fraze Not Yet Wild Join Date: May 2014 Location: N.Alberta Posts: 6	Re: MCOR issue Replaced MCOR 3 with MCOR 4 15 rounds , no issues ... running well. Thanks for the help guys !

Similar Threads
Thread	Forum
Difference between MCOR 1 and MCOR 2	Electric Club Car
Mcor	Electric Club Car
Prcedent mcor issue	Electric Club Car
Charging Issue/ Battery Issue?	Electric EZGO
is my mcor bad	Electric Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum