New XCT400 IQ installed now battery probs?

scottyb · 08-08-2015, 08:59 PM

Post a pic of the whole area under the seat.

AWandKW · 08-08-2015, 11:16 PM

Left the campground tonight before I saw this post. :(

Doing some interwebbings I am pretty sure the 2009 is able to mount 4 -12s or 6 - 8 volts without any modifications! (Not including cables )

I am picking up batteries from SAMs tomorrow morning and if rain holds off - I'll try and mount em.

I also will snap a couple of pics of my XCT400IQ mount as well.

AWandKW · 08-09-2015, 04:25 PM

6 - 8volt batteries fit perfectly!

I couldn't be happier. She's charging up now. Thanks to everyone for their help.

Twincam47 · 08-09-2015, 05:08 PM

I also have an 09 Precedent with 4-12V batts. Let us know what speeds you are achieving and other mods done to your cart.

Thanks

AWandKW · 08-09-2015, 09:14 PM

I would love to!
Just with stock controller setting 3 (?) and the larger tires i had it to 23mph.

The 6 batteries were an easy fit! I removed a plastic piece that was made to be removed on the tub floor. It held the 2 inner batteries of the original 4. With that removed the 6 batteries seemed easier than lifting those huge 12v ones in place.
I also had to modify hold down plastic, took 2 seconds with pliers. I had to remove the top so it would fit over the carrying lugs on top of two middle batteries. I can get a better pic if you need it.

Now with new batteries, 4 ga cables, heave duty solenoid and the XCT400IQ controller I'm really excited to see what it'll do after the battery break in period.

Twincam47 · 08-09-2015, 10:57 PM

Guess I will be contacting ScottyB>

A couple of pic of how you mounted the controller would be nice also.

buckmanmike · 08-10-2015, 08:38 PM

I have energizer 8v batteries from Sams. Dated 08/08. I've had good service out of them, but they are tired now. Will be replacing next week with Trojan 875s. Found Trojans for only $15 more each, so decided to go that route.

AWandKW · 08-11-2015, 10:16 PM

I was able to take a couple pictures of the XCT400IQ install I purchased from scottyb.

AWandKW · 08-11-2015, 10:18 PM

I had to trim a little off the back of compartment that holds controller and solenoid.

Twincam47 · 08-12-2015, 04:27 PM

Thanks for the pics....you get a speed reading on her yet?

08-08-2015, 08:59 PM	#11
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,406	Re: New XCT400 IQ installed now battery probs? Post a pic of the whole area under the seat.

08-08-2015, 11:16 PM	#12
AWandKW Not Yet Wild Join Date: Apr 2014 Location: Midwest Posts: 60	Re: New XCT400 IQ installed now battery probs? Left the campground tonight before I saw this post. :( Doing some interwebbings I am pretty sure the 2009 is able to mount 4 -12s or 6 - 8 volts without any modifications! (Not including cables ) I am picking up batteries from SAMs tomorrow morning and if rain holds off - I'll try and mount em. I also will snap a couple of pics of my XCT400IQ mount as well.

08-09-2015, 05:08 PM	#14
Twincam47 Not Yet Wild Join Date: Jul 2015 Location: Lake Conroe, Texas Posts: 41	Re: New XCT400 IQ installed now battery probs? I also have an 09 Precedent with 4-12V batts. Let us know what speeds you are achieving and other mods done to your cart. Thanks

08-09-2015, 09:14 PM	#15
AWandKW Not Yet Wild Join Date: Apr 2014 Location: Midwest Posts: 60	Re: New XCT400 IQ installed now battery probs? I would love to! Just with stock controller setting 3 (?) and the larger tires i had it to 23mph. The 6 batteries were an easy fit! I removed a plastic piece that was made to be removed on the tub floor. It held the 2 inner batteries of the original 4. With that removed the 6 batteries seemed easier than lifting those huge 12v ones in place. I also had to modify hold down plastic, took 2 seconds with pliers. I had to remove the top so it would fit over the carrying lugs on top of two middle batteries. I can get a better pic if you need it. Now with new batteries, 4 ga cables, heave duty solenoid and the XCT400IQ controller I'm really excited to see what it'll do after the battery break in period.

08-09-2015, 10:57 PM	#16
Twincam47 Not Yet Wild Join Date: Jul 2015 Location: Lake Conroe, Texas Posts: 41	Re: New XCT400 IQ installed now battery probs? Guess I will be contacting ScottyB> A couple of pic of how you mounted the controller would be nice also.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

08-10-2015, 08:38 PM	#17
buckmanmike Gone Wild Join Date: Oct 2007 Location: Snellville, Ga. Posts: 1,304	Re: New XCT400 IQ installed now battery probs? I have energizer 8v batteries from Sams. Dated 08/08. I've had good service out of them, but they are tired now. Will be replacing next week with Trojan 875s. Found Trojans for only $15 more each, so decided to go that route.

08-12-2015, 04:27 PM	#20
Twincam47 Not Yet Wild Join Date: Jul 2015 Location: Lake Conroe, Texas Posts: 41	Re: New XCT400 IQ installed now battery probs? Thanks for the pics....you get a speed reading on her yet?

Similar Threads
Thread	Forum
Installed a battery meter below the cup holders	Electric EZGO
Installed Battery Meter and now '86 Marathon won't go	Electric EZGO
New to me 99 cc a few probs	Electric Club Car
OBC ver. 2.05 Any probs with this version?	Electric Club Car
Installed new battery and now it wonk crank!	Gas EZGO