|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
07-27-2016, 08:48 PM
|
#1 |
|
Not Yet Wild
Join Date: Aug 2009
Posts: 63
|
Ezgo wont move after wash
I have never had a problem but this time I just installed my motor after rebuild and had controller cover off. So it did get very very lil drops on it, blowed all connector out. Some times it will move forward or reverse about 5 feet, then gets jumpy like dead battery's. Guess Ill try it morning after drying a bit.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-28-2016, 05:39 AM
|
#2 |
|
......................
 Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: Ezgo wont move after wash
Should run when it dry's out. You don't want to get that stock controller wet
|
|
|
|
|
07-28-2016, 08:12 AM
|
#3 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Ezgo wont move after wash
Concentrate on drying the F&R micro switches if it is a series cart
 |
|
|
|
|
07-29-2016, 09:14 AM
|
#4 |
|
Not Yet Wild
Join Date: Aug 2009
Posts: 63
|
Re: Ezgo wont move after wash
Guess I got lucky this time, after it dried we back in business. Thanks fellos
|
|
|
|
|
07-29-2016, 11:30 AM
|
#5 |
|
Gone Wild
Join Date: Apr 2016
Location: Greenwood, SC
Posts: 1,291
|
Re: Ezgo wont move after wash
That usually happens
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Wash and Brush Engine - Now It Wont Start | Gas Club Car | |||
| EZGO wont move | Electric EZGO | |||
| Ezgo dcs solenoid clicks but wont disengage and wont move | Electric EZGO | |||
| 93 ezgo wont move | Electric EZGO | |||
Linear Mode
