Starting with an XCT and NO HARNESS. Which should I use?

LukeL · 10-28-2018, 09:36 PM

I'm going to be replacing a dead Curtis 1268-5411 controller with an Alltrax XCT. Since the 1268 plug isn't compatible with any available XCT's, which XCT should I choose that would be easiest to make a harness for? The PDS version? TXT 48?

I'm basically wanting to start fresh with a controller with no existing low current wires.

I know this is easy on a series drive but the sepex is more complicated.

scottyb · 10-28-2018, 11:03 PM

There is a conversion harness for this cart. Post a pic of your plug to be sure.

LukeL · 10-29-2018, 04:02 AM

It’s an oddball. The pins do not match the regular 1268 diagram.

Club Car DS driver’s club #59

scottyb · 10-29-2018, 07:54 AM

Yup - we have an adapter for the stock 1268 controller harness to the XCT for G19 control

LukeL · 10-29-2018, 07:59 AM

This is a WEIRD 1268. Custom made for this Cushman hauler. The pins that are normally not used are used and the ones used are in a different order. Do you still think it would work? I don’t really...[emoji52]

Club Car DS driver’s club #59

scottyb · 10-29-2018, 09:46 AM

If you have doubts call the Alltrax tech support line at 541+476-3565 ext 3.
There are 2 harness adapters available - we carry the 1268 and can get the other seldom used one. I hope this helps

LukeL · 10-29-2018, 10:16 AM

I will contact them. Whatever I get will come from you. Thanks!

Club Car DS driver’s club #59

kgsc · 10-29-2018, 12:02 PM

Luke in your case it may be better just to cut that 24 pin connector off and find a harness with a plug to go into the new controller. Or a buy a new PDS harness and rip out most what you have in there now..

LukeL · 10-29-2018, 12:15 PM

Quote:

Originally Posted by kgsc

Luke in your case it may be better just to cut that 24 pin connector off and find a harness with a plug to go into the new controller. Or a buy a new PDS harness and rip out most what you have in there now..

Exactly what I was thinking. Where to find a PDS harness?

Club Car DS driver’s club #59

scottyb · 10-29-2018, 12:17 PM

Shopezgo.com

10-28-2018, 09:36 PM	#1
LukeL Gone Wild Join Date: Jun 2017 Location: Savannah, GA Posts: 6,539	Starting with an XCT and NO HARNESS. Which should I use? I'm going to be replacing a dead Curtis 1268-5411 controller with an Alltrax XCT. Since the 1268 plug isn't compatible with any available XCT's, which XCT should I choose that would be easiest to make a harness for? The PDS version? TXT 48? I'm basically wanting to start fresh with a controller with no existing low current wires. I know this is easy on a series drive but the sepex is more complicated.

10-28-2018, 11:03 PM	#2
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,419	Re: Starting with an XCT and NO HARNESS. Which should I use? There is a conversion harness for this cart. Post a pic of your plug to be sure.

10-29-2018, 04:02 AM	#3
LukeL Gone Wild Join Date: Jun 2017 Location: Savannah, GA Posts: 6,539	Re: Starting with an XCT and NO HARNESS. Which should I use? It’s an oddball. The pins do not match the regular 1268 diagram. Club Car DS driver’s club #59

10-29-2018, 07:54 AM	#4
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,419	Re: Starting with an XCT and NO HARNESS. Which should I use? Yup - we have an adapter for the stock 1268 controller harness to the XCT for G19 control

10-29-2018, 09:46 AM	#6
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,419	Re: Starting with an XCT and NO HARNESS. Which should I use? If you have doubts call the Alltrax tech support line at 541+476-3565 ext 3. There are 2 harness adapters available - we carry the 1268 and can get the other seldom used one. I hope this helps

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

10-29-2018, 07:59 AM	#5
LukeL Gone Wild Join Date: Jun 2017 Location: Savannah, GA Posts: 6,539	Re: Starting with an XCT and NO HARNESS. Which should I use? This is a WEIRD 1268. Custom made for this Cushman hauler. The pins that are normally not used are used and the ones used are in a different order. Do you still think it would work? I don’t really...[emoji52] Club Car DS driver’s club #59

10-29-2018, 10:16 AM	#7
LukeL Gone Wild Join Date: Jun 2017 Location: Savannah, GA Posts: 6,539	Re: Starting with an XCT and NO HARNESS. Which should I use? I will contact them. Whatever I get will come from you. Thanks! Club Car DS driver’s club #59

10-29-2018, 12:02 PM	#8
kgsc Gone Wild Join Date: Dec 2009 Location: Aiken, SC Posts: 13,188	Re: Starting with an XCT and NO HARNESS. Which should I use? Luke in your case it may be better just to cut that 24 pin connector off and find a harness with a plug to go into the new controller. Or a buy a new PDS harness and rip out most what you have in there now..

10-29-2018, 12:17 PM	#10
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,419	Re: Starting with an XCT and NO HARNESS. Which should I use? Shopezgo.com

Similar Threads
Thread	Forum
Harness Help	Electric Club Car
PDS Harness	Electric EZGO
WTB: Ez Go PDS Run/Tow Harness	Golf Carts and Parts
Starting the new buggy...starting from new this time.	Members Rides
she's starting to shimmy....she's starting to shudder	Electric Club Car