Alltrax SR 400 Blue Wire

[Wags-Rodz]

First, I will try to remember to send you a heads up message this thead has started Scotty
So I got the 400 conversion kit for my EXGO...super cool, everything went together very well I thought. My build experience is just becoming a 3 I'd say on Scottys scale.
In retrospect I guess I recall putting this item off until I had a better understanding of the actual rocker F&R switch.

The diagram I have says two center pins on switch must be bridged in order to use the second row of terminals ...ect.. (Universal conversion sw202 reverse)
I am having an issue with the switch wiring itself, everything I've seen pictures of including your installs have three wires, but this diagram says I'd have 4 and a jumper.

So, I'm wondering if I run my " Blue reverse" from the post on the solenoid where the "Y" (reverse sw202 activation) wire is plugged in to my J1 blue input on the contoller .

Forgive the horrible attempts at uh..words. I have some good pics that should tell the story better. I was reading several other threads before posting. so I have run down a few other issues already and have found the help here fantastic, heck that's why I got the kit from Carts unlimited. Now if only I could find a qualified installer...

Thanks
Darrell

[Wags-Rodz]

more pics

[scottyb]

Answered this question in my email.