|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
01-17-2020, 04:49 PM | #1 |
Gone Wild
Join Date: Feb 2015
Location: Myrtle Beach, S.C.
Posts: 226
|
Stock precedent controller ?
Controller was working fine. Pulled it to start a lithium conversion and noticed this melted spot on the terminal.
Put new cables one, so if that was possible cause that has been corrected. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-17-2020, 07:31 PM | #2 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: Stock precedent controller ?
Check the white wire on the motor to make sure it's clean and in good condition. A poor connection at the A2 terminal on the motor can make that white wire get hot and cause the controller casing to melt.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
FS: Precedent Stock Controller, Solenoid, Speed Code Programmers | Golf Carts and Parts | |||
Stock controller and various other parts for Precedent | Golf Carts and Parts | |||
All stock 08 precedent iq but installing a 500 amp controller & wires | Electric Club Car | |||
2010 Precedent Stock Controller Upgrade | Electric Club Car | |||
2008 Precedent Controller Help (Stock or Aftermarket) | Electric Club Car |