|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
03-10-2020, 06:09 PM | #1 |
Getting Wild
Join Date: Jan 2013
Posts: 95
|
Help..Alltrax xct 400 and Admiral Mot A2
Ok guys finishing up this install and got a few issues and questions...
Alltrax installed and wired correctly, turn the key and controller goes to solid green light, ready to operate. First I unplugged the negative side of the pack Hooked the alltrax to computer running windows 10. Opened the program, it saw the controller and when I went to load the field map for new motor, the program kept loosing controller contact and the program would go blank (not seeing any controller)? I then hooked the pack back up turned the key on opened the program, saw the controller and I believe I got the field map loaded, it said loaded but how do I know for sure? I don't really understand where its supposed to show in the program per the instructions? I tried the same procedure on the firmware update but it keeps losing the controller and it gets stuck in programming mode, solid red light on controller and the program goes blank? What am I missing frustrating...Keep in mind the motor isn't in yet so there is no motor hooked up, the wires are hooked to the controller only. Any help greatly appreciated. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-25-2020, 03:55 PM | #2 |
Gone Wild
Join Date: Aug 2009
Posts: 14,245
|
Re: Help..Alltrax xct 400 and Admiral Mot A2
Strange; do you have the latest version of the Alltrax ToolKit software installed?
|
03-25-2020, 04:48 PM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Help..Alltrax xct 400 and Admiral Mot A2
The controller can be bench programmed. Whoever sold you the package should have done this. The field map shows at the bottom of the opening screen in BOLD print.
Sometime my anit-virus will interfere with the program... try disabling the virus protection to upgrade the control. Also note. THe upgrade being offered has to do with running the BT module. If you do not run the BT module you do nto need the update. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Alltrax XCT-Admiral A4 Field Map | Electric Club Car | |||
New 500amp Alltrax and Admiral B2 Motor | Electric EZGO | |||
Low Max RPM Alltrax XCT500 Admiral B2 Motor | Electric EZGO | |||
NO SPEED, new Alltrax & Admiral B2 | Electric EZGO | |||
Alltrax XCT 400 with Admiral MOT-D2 field map | Electric Yamaha |