|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-14-2011, 04:06 PM | #1 |
Not Yet Wild
Join Date: May 2008
Location: Hempstead Texas
Posts: 10
|
power wise charger
I have a charger with bad board. I ordered new upgraded board.It has two wires i don't know where they attach.I need a pictorial to help. The old board had terminals with brown and orange wires to them.Do I clip these wires to each other or by pass old wires.
Thanks Don |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-16-2011, 05:21 PM | #2 |
Getting Wild
Join Date: Mar 2010
Posts: 108
|
Re: power wise charger
Assuming it is the powerwise without the LED look at the following link
https://secure.golfcarcatalog.com/do...20Retrofit.pdf Very good instructions and a good site for all sorts of info. |
01-16-2011, 06:43 PM | #3 |
Gone Wild
Join Date: Jun 2010
Location: Central Florida
Posts: 2,757
|
Re: power wise charger
Your charger originally came with the 2 board setup. 1 was the power board and the other was the timer board. The new board combines those functions into 1 board.
leave the board that was mounted to the front of the charger and just ignore it. remove the board that sits on the bottom of the charger.install the new board in that location. You will have a black wire and a red wire on the new board. The red wire goes to the small clip that is attached to the heatsink at the front of the charger, the black wire connects to the 16 gauge red wire that is coming out of the DC cord. Hope that helps. |
01-18-2011, 12:01 PM | #4 |
Not Yet Wild
Join Date: May 2008
Location: Hempstead Texas
Posts: 10
|
Re: power wise charger
Thanks changed out board and pluged into cart nothing. pulled wires from relay and connected charger and have 41.6 dc volts from plug.while pluged into cart checked batteries and have 36.6 volts across battries. I left charger on for one hour to fully charge cart and found no difference in cart batteries. I was going to use cart and found it will not respond in forward or reverse. I checked female plug into cart and have 36.6 volts at plug. Now I have two problems don't know what to fix first. Amy suggestions?
Thanks Don |
01-27-2011, 01:18 PM | #5 |
Not Yet Wild
Join Date: May 2008
Location: Hempstead Texas
Posts: 10
|
Re: power wise charger
Found loose wire on cart and repaired. Now I get voltage reading from cart dc plug and pluged in repaired charger. Charger started working and left it on cart to charge batt. cart now workes and all is ok. Thanks all for info couldn't have done without your help.
Don |
|
|
Similar Threads | ||||
Thread | Forum | |||
Power Wise Charger worked after board replaced now back to no power | Electric EZGO | |||
36V Power Wise Charger $125 | Golf Carts and Parts | |||
Power Wise Charger | Electric EZGO | |||
power wise charger | Electric EZGO | |||
power wise QE charger | Electric golf carts |