Axle locker????

thewskrs · 04-10-2011, 07:07 PM

Quote:

Originally Posted by Andy4639

That's a lot of help!

Geeez, sorry, I was just tellin ya it isn't rocket science. I knew they send good instructions. If you are at all mechanical, you can do it.

Andy4639 · 04-10-2011, 08:04 PM

Quote:

Originally Posted by madoc1

not hard at all. pull the axles, then unbolt the two caps holding the ring gear and carrier. disassemble, smooth the larger pinion gears with a grinder or sander, then just reassemble using the posi block. once it is all together just pry off the two small retaining clips and you are done. plowman has good instructions.

Now I can see what it looks like. Thanks for the info. Do you need a press for this method? That would be the only thing I don't have.
Thanks for the

kward · 04-11-2011, 09:04 PM

You don't need a press, and it only took me about 45 minutes start to finish and it works great....

Andy4639 · 04-11-2011, 09:32 PM

Thanks I may have just found my next project for the Monster E-Z-GO cart!

04-11-2011, 09:04 PM	#13
kward Getting Wild Join Date: Dec 2010 Location: Columbus, GA Posts: 90	Re: Axle locker???? You don't need a press, and it only took me about 45 minutes start to finish and it works great....

04-11-2011, 09:32 PM	#14
Andy4639 48/400/Alltrax HS motor Join Date: Jan 2007 Location: Liberty SC, Garden City SC Posts: 6,190	Re: Axle locker???? Thanks I may have just found my next project for the Monster E-Z-GO cart!

Similar Threads
Thread	Forum
Club Car Limited Slip or Locker What do you have?	Lifted Golf Carts
non steer axle conversion to steer axle	Lifted Golf Carts
cc locker	Gas Club Car
limited slip, locker question	Electric EZGO
Kawasaki locker	Gas Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum