|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
09-01-2011, 11:07 AM | #1 |
Not Yet Wild
Join Date: Jul 2011
Posts: 20
|
starter solenoid testing
I purchased a new starter solenoid for my '88 Club Car and cracked the shell under one of the small terminals. I've removed it from the cart. Is there any way to test this outside of the normal cart wiring? (if it works, I'm going to epoxy the crack to protect the solenoid). Thanks!!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-01-2011, 11:43 AM | #2 |
Gone Wild
Join Date: Jul 2008
Location: Reddick IL
Posts: 11,220
|
Re: starter solenoid testing
Two jumper wires to the small terminals
from a 12 volt source and it should click. Test across the large terminals for continuity with your ohmmeter. Use a high temp epoxy. |
09-01-2011, 12:14 PM | #3 |
Not Yet Wild
Join Date: Jul 2011
Posts: 20
|
Re: starter solenoid testing
Thanks, DOOmsman!
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Solenoid Testing | Electric Club Car | |||
Solenoid Testing | Electric Yamaha | |||
Solenoid Testing | Electric EZGO | |||
2003 iq 48v solenoid testing | Electric Club Car | |||
solenoid testing | Electric EZGO |