|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
11-13-2011, 02:41 PM | #1 |
Gone Wild
Join Date: Aug 2011
Location: Va Beach, Virginia
Posts: 324
|
After market turn signal installation.. questions
Cart – 1997 CC Frontier Villager 48V, I desire to install turn signals, several aftermarket kits are out there, but the question I have is, as I look at the front and rear lights there are two additional wires coming out of the loom that are “capped” off at each front light and rear light location. Is the CC already wired for turn signal and all I have to do is find the harness plug in behind the dash? Hoping someone else has a 97 that they either have turn signals on or installed.
Thanks, Beryl |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-13-2011, 05:27 PM | #2 |
The Last Moja Morani
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: After market turn signal installation.. questions
it may be wired for another light but i don,t think its just for turn signals.........your gonna have to add marker lights and that may be where you tap into them ..............................................
|
11-25-2011, 11:03 PM | #3 |
Gone Wild
Join Date: Aug 2011
Location: Va Beach, Virginia
Posts: 324
|
Re: After market turn signal installation.. questions
Install complete, the wiring that I located behind the stock CC dash was for the front marker lights, ran the turn signal yellow and green to theses, tapped the rear turn signals into the brake light bulb wiring and all is good to go.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Turn signal installation | Electric EZGO | |||
No turn signal | Electric EZGO | |||
Which turn signal kit? | Electric EZGO | |||
Turn signal help | Lifted Golf Carts | |||
Turn signal | Electric EZGO |