|
04-12-2014, 08:41 PM
|
#1 |
|
Not Yet Wild
Join Date: Sep 2012
Location: texas
Posts: 29
|
Starter/generator wiring
Just another question about Starter/Gen. wiring , can it be wired for a key start? and if so , is there a diagram out there ? I think the Starter/Gen. will be a little more heavy duty than the clone starter.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-13-2014, 08:13 AM
|
#2 |
|
Searching for The Way
 Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,436
|
Re: Starter/generator wiring
I'm sure there's a way to do it, but I've never seen it done. The pedal switch kind of acts like a key switch to get it started. Once the engine is running the starter automatically turns to generator, so it's really the same either way. I bench tested my starter/gen and it worked fine, so you just have to put power and ground to it and it fires right up. You'll have to experiment a bit, but I'm sure it can be done. I have considered doing the same thing but with a starter button. Same idea just no key. Be sure to post pics!
 |
|
|
|
|
06-14-2014, 03:47 AM
|
#3 |
|
Not Yet Wild
Join Date: Mar 2014
Location: Connecticut
Posts: 6
|
Re: Starter/generator wiring
My GCOR quit working so I'm putting in a heavy duty truck starter button now using a heavier gauge wire than the stock wiring to handle the load coming from the + and - from the solenoid.I'm also putting in an analog voltmeter while the dash is out.Does anyone think I'll have a problem with this?
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Duromax generator/starter wiring question | Clone Engine Swaps | |||
| G1 Starter Generator problem (and wiring) | Gas Yamaha | |||
| Ezgo Starter/ Generator Wiring | Gas EZGO | |||
| Starter/generator wiring diagram | Gas EZGO | |||
| Help wiring starter generator | Gas Club Car | |||
Linear Mode
