|
|
|||||||
| Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
10-28-2020, 04:19 PM
|
#11 |
|
Not Yet Wild
Join Date: Jun 2020
Posts: 22
|
Re: Mzj 400a solenoid install On G29
One day I will learn how to share smaller images..but not today.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
10-28-2020, 06:17 PM
|
#12 |
|
Not Yet Wild
Join Date: Sep 2020
Posts: 11
|
Re: Mzj 400a solenoid install On G29
On mine, I have a red/yellow wire where yours is red going to the tow/run switch and red/black where you have the black going to the controller. I put the diode facing the run/tow side (left just like yours in the picture), but I got nothing after install. I was under the impression that the large posts did not matter, but do they for the diode? If so, the positive from the battery pack is on the right big post which would mean I would need my diode to be opposite from the picture, and I had it wired backwards when I tried it. If that’s the case, it could be why it appears my controller is not working now.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Mock Install: Alltrax SR48500 Controller, 400a Solenoid, SW202 Reversing Contactor | Electric EZGO | |||
| MZJ-400A Solenoid install issues | Electric Club Car | |||
| EZGO PDS - New ALLTRAX XCT48500 and 400a solenoid install. no light - newbie | Electric EZGO | |||
| ScottyB Alltrax 500,wires,400A &202 install | Electric EZGO | |||
| Alltrax Controller and 400a Solenoid Install Help | Electric Club Car | |||
Linear Mode
