|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
07-27-2012, 06:25 PM | #1 |
Gone Wild
Join Date: May 2011
Location: North East Tn.
Posts: 1,029
|
Coil Replacement
I replaced the coil on my 2001, G-20, 301cc, the bolt holes were not slotted and to me seemed to be no adjustment can someone verify if I'm right or do they need to be set some way.
Thanks for your help, LURCH!!!!!! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-27-2012, 07:34 PM | #2 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: Coil Replacement
Can't seem to find the "gap setting" in the service manual, but I use a match book cover so the I don't need 2 feeler gauges.
|
07-27-2012, 07:49 PM | #3 |
Gone Wild
Join Date: May 2011
Location: North East Tn.
Posts: 1,029
|
Re: Coil Replacement
Thanks I guess I'll take the cover back off and set it this time!!!!!!
LURCH!!!!! |
07-28-2012, 11:38 AM | #4 |
Gone Wild
Join Date: May 2011
Location: North East Tn.
Posts: 1,029
|
Re: Coil Replacement
I pulled the side cover back off and set it as stated above which was about .020
Thanks for your help!!!!! LURCH!!!!! |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Pioneer 1200 2001 Ignition Coil Replacement | Gas Club Car | |||
Best Replacement Coil | Gas EZGO | |||
GREAT replacement 2-stroke coil, CHEAP! | Gas EZGO | |||
'83 Marathon Coil over Shock replacement | Gas EZGO | |||
coil replacement | Gas Club Car |