|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
04-24-2013, 10:42 PM | #1 |
Gone Wild
Join Date: Jul 2011
Posts: 389
|
81 g1 clutch weights
Hello, i was checking a old clutch to rebuild, and were the weights ride on it looks like a pc of round emery cloth, its loose, and thick, but its not metal, are these like this? Is it something to put new when u rebuild it? And does plowmans sell rebuilt kits for these old clutchs? Thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-25-2013, 05:56 AM | #2 |
Gone Wild
Join Date: Dec 2012
Location: E. Wallyworld Vermont
Posts: 234
|
Re: 81 g1 clutch weights
As far as a few of us whom recently have rebuilt G1 clutches go we have not found a "kit" The weights and steel pins are still available from Yamaha and depending where you buy the parts add up to around a hundred or more.
|
04-25-2013, 06:24 AM | #3 | |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,441
|
Re: 81 g1 clutch weights
Quote:
|
|
04-25-2013, 06:48 AM | #4 |
Gone Loco
Join Date: Aug 2012
Location: Cuyahoga Falls, Ohio
Posts: 722
|
Re: 81 g1 clutch weights
The washers you speak of are a plastic/resin material and should be replaced with the pins and weights. They are somewhat loose when new. I don't think anyone stocks these parts and most order from Yamaha when you order from them. Go to your local bike shop and order from Yamaha direct, make sure you have the part #s. I think my cost for all was around $120.
|
04-25-2013, 02:45 PM | #5 | |
Gone Wild
Join Date: Jul 2011
Posts: 389
|
Re: 81 g1 clutch weights
Quote:
|
|
04-25-2013, 02:47 PM | #6 |
Gone Wild
Join Date: Dec 2012
Location: E. Wallyworld Vermont
Posts: 234
|
Re: 81 g1 clutch weights
A picture of it would help.
|
04-25-2013, 03:50 PM | #7 |
Gone Loco
Join Date: Aug 2012
Location: Cuyahoga Falls, Ohio
Posts: 722
|
Re: 81 g1 clutch weights
No kit available you have to order each piece and a pic really would help
|
|
|
Similar Threads | ||||
Thread | Forum | |||
G1 Primary Clutch Weights | Gas Yamaha | |||
WTB drive clutch weights for Yamaha G2 | Golf Carts and Parts | |||
Should I pull the gov. weights off the cam? | Big Block Talk! | |||
WTB - Comet Pentagonal Activator Pucks (weights) | Golf Carts and Parts | |||
correct installation of clutch weights | Gas EZGO |