lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 09-24-2017, 04:48 PM   #1
J5szatkowski
Not Yet Wild
Club Car
 
Join Date: Sep 2017
Location: Atlanta, GA
Posts: 14
Default First Build, S1 and S2 Extremely Hot

Really hoping someone can help me out...

I have a 1995 Club Car DS 36v with controller, no resistor coils, no obc. I just replaced the solenoid, diode, resistor and put brand new batteries in it. I also just replaced all three micro switches at the f/n/r and the micro switch inside of the vglide.

First problem- When I turn the key and move the f/n/r lever either direction, the solenoid clicks. I thought it was only supposed to click when the gas pedal was pressed...

When pushing the accelerator, I hear the "whine" from the controller but the cart will not move.

Problem 2- With key on, lever to forward, and pedal depressed, the s1 and s2 cables and connections on the f/n/r are getting extremely hot. - all connections seem to be tight.

Pack is reading at 37.5v and I just want to go for my first ride! Hoping someone can help.


Thank you!
J5szatkowski is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 09-24-2017, 06:52 PM   #2
tag50
Gone Wild
Club Car
 
Join Date: Apr 2014
Location: Oregon City, Or
Posts: 1,977
Default Re: First Build, S1 and S2 Extremely Hot

Double check the connections at the V-glide m/s. Wires should be on common (C) and normally closed (NC).

I can't address the second problem.


.
tag50 is offline   Reply With Quote
Old 09-24-2017, 07:26 PM   #3
J5szatkowski
Not Yet Wild
Club Car
 
Join Date: Sep 2017
Location: Atlanta, GA
Posts: 14
Default Re: First Build, S1 and S2 Extremely Hot

I appreciate the advice. I just double checked the connections, and even tried reversing the wires on the V Glide micro switch but nothing changed. I moved the common wire to the NO as well, which resulted in the solenoid not clicking.
J5szatkowski is offline   Reply With Quote
Old 09-25-2017, 09:42 AM   #4
J5szatkowski
Not Yet Wild
Club Car
 
Join Date: Sep 2017
Location: Atlanta, GA
Posts: 14
Default Re: First Build, S1 and S2 Extremely Hot

I'm at a loss because I've tested the motor with a jump box and it seemed to work fine. I also don't want to spend the $ on a new f/n/r if it's a simple wiring issue. The fact that the orange and blue wire (s1 & s2) are getting extremely hot when the accelerator is pushed and the cart won't move concerns me.
J5szatkowski is offline   Reply With Quote
Reply

Tags
scottyb
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Extremely low batteries Electric Club Car
Extremely hot battery post Electric EZGO
New PQ Bandit getting extremely Hot Electric EZGO
G9 getting extremely Gas Yamaha
Extremely hot motor Electric EZGO


All times are GMT -5. The time now is 10:04 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.