RXV AC Motor Rebuild

tjdove111 · 12-13-2018, 06:13 PM

Where can I get an AMD A.C. motor from a 2008 EZGO RXV rebuilt?

yurtle · 12-13-2018, 06:56 PM

http://bfy.tw/LLLC

Doesn't look too promising.

cgtech · 12-14-2018, 10:11 AM

Quote:

Originally Posted by tjdove111

Hey Google, Where can I get an AMD A.C. motor from a 2008 EZGO RXV rebuilt?

There I fixed it... That link was funny.

What part of it needs rebuilt? What part would you like replaced? There isn't much to do in there.

agpfl · 12-14-2018, 01:25 PM

Where are you located?

tjdove111 · 12-14-2018, 04:08 PM

I am located in Minneapolis Minnesota

tjdove111 · 12-14-2018, 04:12 PM

I was told I need a new one. I don't know that much about it and I wanted to see if there was a cheaper alternative since the new ones are pricey!

So now I asked for more information and I was told that it throws a brake sensor fault code which is being caused by the encoder. But it is a a first gen motor and the encoder is not replaceable in first gen.

cgtech · 12-14-2018, 05:14 PM

I am Ezgo factory certified, never seen a Rxv without replaceable encoder. The only sensor in a Rxv motor that's not replaceable is the temp sensor (it's woven into the motor windings). Will get you encoder part number. Care to post a pic of the motor?

Encoder part number 612595

agpfl · 12-14-2018, 08:50 PM

If was hoping you were close because I have a 2012 motor. Let me know if you do need to replace it, maybe we can work something out.

Definitely try to troubleshoot first though.

Sent from my SM-G950U using Tapatalk

usgicollector · 12-14-2018, 09:21 PM

RXV Bearing Encoder

Part #612595

sthreatt · 03-21-2021, 08:50 AM

The RXV's with Curtis controller have a speed sensor thats a simple bolt and an O-ring to replace. The carts with the Danaher controller have a bearing encoder incorporated into the motor bearing. You have to remove and disassemble the motor to replace and they're quite pricey. I have found them on eBay and Amazon ranging from $150 to $240 plus shipping. Not really too bad a job after you get the motor off.

12-13-2018, 06:13 PM	#1
tjdove111 Not Yet Wild Join Date: Jul 2011 Posts: 3	RXV AC Motor Rebuild Where can I get an AMD A.C. motor from a 2008 EZGO RXV rebuilt?
tjdove111 Not Yet Wild Join Date: Jul 2011 Posts: 3

12-13-2018, 06:56 PM	#2
yurtle Gone Mad Join Date: Oct 2009 Location: Buford, GA Posts: 8,988	Re: RXV AC Motor Rebuild http://bfy.tw/LLLC Doesn't look too promising.

12-14-2018, 01:25 PM	#4
agpfl Wild Gone Join Date: Oct 2016 Location: Davie, FL Posts: 633	Re: RXV AC Motor Rebuild Where are you located?

12-14-2018, 04:08 PM	#5
tjdove111 Not Yet Wild Join Date: Jul 2011 Posts: 3	Re: RXV AC Motor Rebuild I am located in Minneapolis Minnesota
tjdove111 Not Yet Wild Join Date: Jul 2011 Posts: 3

12-14-2018, 04:12 PM	#6
tjdove111 Not Yet Wild Join Date: Jul 2011 Posts: 3	Re: RXV AC Motor Rebuild I was told I need a new one. I don't know that much about it and I wanted to see if there was a cheaper alternative since the new ones are pricey! So now I asked for more information and I was told that it throws a brake sensor fault code which is being caused by the encoder. But it is a a first gen motor and the encoder is not replaceable in first gen.
tjdove111 Not Yet Wild Join Date: Jul 2011 Posts: 3

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

12-14-2018, 05:14 PM	#7
cgtech Over This Interview Is... Join Date: Jun 2012 Location: AZ Posts: 17,449	Re: RXV AC Motor Rebuild I am Ezgo factory certified, never seen a Rxv without replaceable encoder. The only sensor in a Rxv motor that's not replaceable is the temp sensor (it's woven into the motor windings). Will get you encoder part number. Care to post a pic of the motor? Encoder part number 612595

12-14-2018, 08:50 PM	#8
agpfl Wild Gone Join Date: Oct 2016 Location: Davie, FL Posts: 633	Re: RXV AC Motor Rebuild If was hoping you were close because I have a 2012 motor. Let me know if you do need to replace it, maybe we can work something out. Definitely try to troubleshoot first though. Sent from my SM-G950U using Tapatalk

12-14-2018, 09:21 PM	#9
usgicollector Gone Wild Join Date: Mar 2014 Location: NE Indiana & SW Florida Posts: 3,238	Re: RXV AC Motor Rebuild RXV Bearing Encoder Part #612595

03-21-2021, 08:50 AM	#10
sthreatt Gone Wild Join Date: Jul 2015 Location: Central South Carolina Posts: 939	Re: RXV AC Motor Rebuild The RXV's with Curtis controller have a speed sensor thats a simple bolt and an O-ring to replace. The carts with the Danaher controller have a bearing encoder incorporated into the motor bearing. You have to remove and disassemble the motor to replace and they're quite pricey. I have found them on eBay and Amazon ranging from $150 to $240 plus shipping. Not really too bad a job after you get the motor off.

Similar Threads
Thread	Forum
Motor rebuild???	Extreme DC!
Motor rebuild	Electric EZGO
98 ez go dcs motor rebuild	Electric EZGO
295 motor rebuild or buy new?	Gas EZGO
Can you rebuild motor	Electric Club Car