|
04-02-2021, 09:34 AM
|
#1 |
|
Not Yet Wild
Join Date: Apr 2021
Posts: 7
|
DIY rookie
I bought a used club car ds 48 v IQ without batteries for a project. I put new batteries in and nothing works. No forward or reverse, no clicking from selenoid, enemy the charger seems to not be working. I hate to start throwing new parts on it, trying to guess what’s wrong. I appreciate any feedback.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-02-2021, 09:40 AM
|
#2 |
|
Gone Loco
 Join Date: Jul 2020
Location: South Florida
Posts: 1,123
|
Re: DIY rookie
There are tons of possibilities here. Are you sure the key switch is working and in the ON position?
There's likely a problem with the wiring, and you'll need to post up some photos of it for us to help you. The problem is that you are too new to post photos, so upload them to Imgur and post the link or the gallery link. |
|
|
|
|
04-02-2021, 09:50 AM
|
#3 |
|
Not Yet Wild
Join Date: Apr 2021
Posts: 7
|
Re: DIY rookie
There are two wires to the switch, and when I test these on DC V I get nothing.
|
|
|
|
|
04-02-2021, 09:52 AM
|
#4 |
|
Not Yet Wild
Join Date: Apr 2021
Posts: 7
|
Re: DIY rookie
I forgot to say this cart is a 2002 model
|
|
|
|
|
04-02-2021, 09:53 AM
|
#5 |
|
Gone Loco
Join Date: Jul 2020
Location: South Florida
Posts: 1,123
|
Re: DIY rookie
Take some photos of your wiring...something is disconnected somewhere.
|
|
|
|
|
04-02-2021, 09:55 AM
|
#6 |
|
Not Yet Wild
Join Date: Apr 2021
Posts: 7
|
Re: DIY rookie
why would the charger not be working? Would there be a connection with the other issues or is this a seperate problem?
|
|
|
|
|
04-02-2021, 10:19 AM
|
#7 |
|
Not Yet Wild
Join Date: Apr 2021
Posts: 7
|
Re: DIY rookie
I had the two big wires on selenoid disconnected. After reconnecting these I now have power to red wire on switch in the off position.
|
|
|
|
|
04-02-2021, 10:34 AM
|
#8 |
|
Not Yet Wild
Join Date: Apr 2021
Posts: 7
|
Re: DIY rookie
I now can hear a click from the selenoid when I press on accelerator pedal. So I have power at switch when holding black probe on negative battery and red on switch and the selenoid is clicking but doesn’t move.
Here is image link:https://imgur.com/a/SYoVhBw |
|
|
|
|
04-02-2021, 02:37 PM
|
#9 |
|
Gone Loco
Join Date: Jul 2020
Location: South Florida
Posts: 1,123
|
Re: DIY rookie
And you’re trying this with the switch in the RUN position right?
|
|
|
|
|
04-02-2021, 02:55 PM
|
#10 |
|
Not Yet Wild
Join Date: Apr 2021
Posts: 7
|
Re: DIY rookie
It clicks in the run or tow position. With key on or off.
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Rookie | Gas Yamaha | |||
| Rookie needs help | Electric EZGO | |||
| Rookie needs help | Electric Club Car | |||
Linear Mode
