lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 04-02-2021, 02:16 PM   #1
kevinmoore73
Not Yet Wild
Club Car
 
Join Date: Feb 2021
Posts: 16
Default Precedent Voltage Reducer - Sanity Check

Hello,

I purchased a 2017 Precedent a couple months ago and have been lurking on this forum ever since. It's been super helpful! I replaced the front and rear leaf springs (HD in the rear), all bushings, added a 1" leveling block, and put a voltage meter in the dash - all based on what I learned from this forum.

My cart came with LED lights that are powered by two of my six batteries. The negative is plugged into the black/yellow bullet connector and the positive is connected to the positive terminal two batteries over. I would like to do this the correct way and use the whole pack. I bought an OEM voltage reducer from my local Club Car dealer. It came with a harness that attaches to the bucket harness and my lights. I will install the reducer in the factory location up in the front end of the cart.

My question is this - After installing this, do I simply move the positive wire from the bucket harness over to the blue pigtail on the B+ terminal of my pack? (I believe this is what I need to do, and am planning to test the voltage at the light switch for 12V before turning on the lights.)

Thanks for your help!
kevinmoore73 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 04-02-2021, 08:26 PM   #2
kevinmoore73
Not Yet Wild
Club Car
 
Join Date: Feb 2021
Posts: 16
Default Re: Precedent Voltage Reducer - Sanity Check

In reply to myself for any future visitors...

All I had to do was move the bucket harness’ positive write to the blue pigtail. It was otherwise plug-and-play.

I was nervous because I couldn’t trace the key switch wire from the reducer to the key switch itself. It turns out that connects somewhere at or near the brake pedal relay.

In any case, it works.
kevinmoore73 is offline   Reply With Quote
Old 04-02-2021, 09:05 PM   #3
simicrintz
Gone Wild
 
simicrintz's Avatar
Club Car
 
Join Date: Apr 2020
Location: Hurricane, Utah
Posts: 765
Default Re: Precedent Voltage Reducer - Sanity Check

Glad you got it figured out!
simicrintz is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Sanity check on solenoid wiring G29 Electric Yamaha
Battery health - sanity check Electric Club Car
Light Kit and Reducer sanity check Electric Club Car
Precedent voltage reducer Electric Club Car
Voltage reducer question 05 precedent Electric Club Car


All times are GMT -5. The time now is 09:58 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.