Need help with cart problem

spriddle · 09-02-2009, 11:02 AM

Quote:

Originally Posted by Lightninn

Yeah I'll get that belt replaced, too! Hahahah. I think I've gotten my money's worth out of it.

Perhaps the picture doesn't show it well, but the belt is indeed shiny on it's sides. The sides are also angled.

That being said, would this cause the lurching on takeoff?

It could. Usually G16's have to rev up a little before taking off anyway. A G9 is usually immediate. A shiny belt will also indicate that it's been slipping and burned the side of the belt. It can also be a result of getting wet or getting a little grease on it from greasing the clutches. If it's shiny and pitted, I'd replace it.

Lightninn · 09-02-2009, 02:55 PM

Thanks Spriddle. I'm heading out to get one now. I'll update ya when I get it replaced....

Really appreciate all the help.

spriddle · 09-02-2009, 04:46 PM

Your welcome.

DOOmsman · 09-02-2009, 06:02 PM

Is this a kinder Sprid than the one that picks on BOO in some of the other threads?

Lightninn · 09-03-2009, 12:53 PM

Anyone know if there is a conversion chart for drive belts. I looked the part number up on the Yamaha site and it is J55-G6241-00-00 for this 1999 G-16 AT cart. Is there an equivalent EZ Go drive belt? I can get EZ Go belts here locally....

spriddle · 09-03-2009, 01:46 PM

Quote:

Originally Posted by DOOmsman

Is this a kinder Sprid than the one that picks on BOO in some of the other threads?

You mean defends ones self against Boo's insane comments.

spriddle · 09-03-2009, 01:48 PM

Quote:

Originally Posted by Lightninn

Anyone know if there is a conversion chart for drive belts. I looked the part number up on the Yamaha site and it is J55-G6241-00-00 for this 1999 G-16 AT cart. Is there an equivalent EZ Go drive belt? I can get EZ Go belts here locally....

Ezgo belts are narrower than Yamaha drive belts and not sure about length. I would go with OEM. Try one of our sponsors, they can usually get you one in a day or so.

spriddle · 09-03-2009, 01:59 PM

I was curious so I looked these up. The closest match to your stock belt is one for a 91-94 4 cycl Ezgo but it is about an inch longer: 1 3/16 x 40 3/4. Your stock belt is 1 3/16 x 39. You would loose all or most of your torque if it would even stay on the clutches.

Lightninn · 09-03-2009, 02:32 PM

What measures 39" on the belt? Inside or Outside circumference?

spriddle · 09-03-2009, 04:43 PM

Outside.

09-02-2009, 02:55 PM	#12
Lightninn Getting Wild Join Date: Jul 2009 Location: South Carolina Posts: 120	Re: Need help with cart problem Thanks Spriddle. I'm heading out to get one now. I'll update ya when I get it replaced.... Really appreciate all the help.

09-02-2009, 04:46 PM	#13
spriddle Admin Join Date: Dec 2006 Location: TN Posts: 101,858	Re: Need help with cart problem Your welcome.

09-02-2009, 06:02 PM	#14
DOOmsman Gone Wild Join Date: Jul 2008 Location: Reddick IL Posts: 11,220	Re: Need help with cart problem Is this a kinder Sprid than the one that picks on BOO in some of the other threads?

09-03-2009, 12:53 PM	#15
Lightninn Getting Wild Join Date: Jul 2009 Location: South Carolina Posts: 120	Re: Need help with cart problem Anyone know if there is a conversion chart for drive belts. I looked the part number up on the Yamaha site and it is J55-G6241-00-00 for this 1999 G-16 AT cart. Is there an equivalent EZ Go drive belt? I can get EZ Go belts here locally....

09-03-2009, 01:59 PM	#18
spriddle Admin Join Date: Dec 2006 Location: TN Posts: 101,858	Re: Need help with cart problem I was curious so I looked these up. The closest match to your stock belt is one for a 91-94 4 cycl Ezgo but it is about an inch longer: 1 3/16 x 40 3/4. Your stock belt is 1 3/16 x 39. You would loose all or most of your torque if it would even stay on the clutches.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

09-03-2009, 02:32 PM	#19
Lightninn Getting Wild Join Date: Jul 2009 Location: South Carolina Posts: 120	Re: Need help with cart problem What measures 39" on the belt? Inside or Outside circumference?

09-03-2009, 04:43 PM	#20
spriddle Admin Join Date: Dec 2006 Location: TN Posts: 101,858	Re: Need help with cart problem Outside.

Similar Threads
Thread	Forum
Problem with Club Car 92 gas cart	Electric Club Car
Problem with Cart???	Electric EZGO
Bike motor in cart now big problem	Big Block Talk!
gas cart starter problem	Gas EZGO
problem with cart	Electric EZGO