Need help with my 97 ezgo dcs

XtremeGolfCarts · 11-14-2011, 10:31 PM

took the 300 amp Alltrax controller out and went back with the stock ezgo controller and the cart worked fine. went through two alltrax controllers until I just got tired missing with it and went back with stock.

Coltf1991 · 11-15-2011, 12:21 PM

So what exactly do you need help with? All you have done so far is made a statement?

Edit: didn't realize this thread had 3 pages. Thought your previous post was the start of the thread

Spawn · 11-15-2011, 12:35 PM

Quote:

Originally Posted by XtremeGolfCarts

I have a 97 ezgo dcs 36 volt that runs a little over half speed. I have a Alltrax 300 amp controller, hd solenoid, new napa 75 amp batteries. All the wiring is in good condition. Battery pack test good. Does anyone have any ideas?

I would lay odds that you have a cable issue of some kind. Try a set of cables. A bad cable will show volts but its not going to flow the amps. All it takes is some corrosion in a non soldered ring terminal

11-14-2011, 10:31 PM	#21
XtremeGolfCarts Gone Wild Join Date: Sep 2010 Location: Angleton,TX. Posts: 177	Re: Need help with my 97 ezgo dcs took the 300 amp Alltrax controller out and went back with the stock ezgo controller and the cart worked fine. went through two alltrax controllers until I just got tired missing with it and went back with stock.

11-15-2011, 12:21 PM	#22
Coltf1991 Gone Wild Join Date: Jul 2011 Location: Houston, TX Posts: 2,901	Re: Need help with my 97 ezgo dcs So what exactly do you need help with? All you have done so far is made a statement? Edit: didn't realize this thread had 3 pages. Thought your previous post was the start of the thread

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum