melt DOWN !!!

06-06-2013, 08:19 PM

Quote:

Originally Posted by CRK

Winner

and a new wire cable for that post

oh yea !!!

El Camino · 06-06-2013, 08:35 PM

Quote:

Originally Posted by crash test dummy

yea i use an anchor bolt to repair the posts

Wow, that would be a lot better then drilling, tapping and installing a stud. Just drill and run the anchor down. This should be added to the post repair in the stickies.

El Camino · 06-06-2013, 08:36 PM

Wish I'd seen that when I had to fix my post.

06-06-2013, 08:40 PM

Quote:

Originally Posted by El Camino

Wow, that would be a lot better then drilling, tapping and installing a stud. Just drill and run the anchor down. This should be added to the post repair in the stickies.

i get them from home depot use a taped off bit so i don't go to deep then 2 nuts and socket the tighten it down .. if its to be added to sticky i would do a full write up

roady89 · 06-06-2013, 08:49 PM

It wont be. Theres a reason theres not already a sticky.

06-06-2013, 08:53 PM

Quote:

Originally Posted by roady89

It wont be. Theres a reason theres not already a sticky.

Disclaimer: The information contained on this page is for information only.
If you try this you do at your own risk and responsibility.

yes i understand .. if i do a write up will it be deleted ?

roady89 · 06-06-2013, 08:54 PM

No, it wont be stickied.

El Camino · 06-06-2013, 09:05 PM

Quote:

Originally Posted by roady89

No, it wont be stickied.

Sorry, just thought it was a good idea.

rib33024 · 06-07-2013, 12:34 AM

I have used this and it worked good, i took a wire wheel that goes in the drill and ruff up the surface and apply the JB weld

Amazon.com: J-B Weld 8277 Water Weld: Automotive

Stevegrmich · 06-07-2013, 04:21 AM

just curious . . . was the Battery Life Saver involved with this battery?

06-06-2013, 08:36 PM	#13
El Camino Gone Wild Join Date: Jun 2012 Location: Christiansburg, VA Posts: 159	Re: melt DOWN !!! Wish I'd seen that when I had to fix my post.

06-06-2013, 08:49 PM	#15
roady89 nimda Join Date: Jun 2007 Posts: 13,022	Re: melt DOWN !!! It wont be. Theres a reason theres not already a sticky.
roady89 nimda Join Date: Jun 2007 Posts: 13,022

06-06-2013, 08:54 PM	#17
roady89 nimda Join Date: Jun 2007 Posts: 13,022	Re: melt DOWN !!! No, it wont be stickied.
roady89 nimda Join Date: Jun 2007 Posts: 13,022

06-07-2013, 12:34 AM	#19
rib33024 ...................... Join Date: Apr 2009 Location: FT Lauderdale FL. Posts: 16,416	Re: melt DOWN !!! I have used this and it worked good, i took a wire wheel that goes in the drill and ruff up the surface and apply the JB weld Amazon.com: J-B Weld 8277 Water Weld: Automotive Amazon.com: J-B Weld 8277 Water Weld: Automotive

06-07-2013, 04:21 AM	#20
Stevegrmich Medicare Recipient Join Date: Jun 2011 Location: West Michigan Posts: 3,541	Re: melt DOWN !!! just curious . . . was the Battery Life Saver involved with this battery?

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
What would cause a battery terminal to melt?	Electric Club Car
Battery post melt?	Electric Club Car
melt down	Gas Club Car
Battery melt	Electric EZGO
93 cc v-glide melt down x2	Electric Club Car