|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-26-2014, 08:57 PM | #11 |
Gone Wild
Join Date: Aug 2010
Location: brooksville fl
Posts: 412
|
Re: 2011 txt electrical gremlin
Ya I'm curious to know what the problem is.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-26-2014, 10:28 PM | #12 |
Gone Wild
Join Date: Aug 2010
Location: brooksville fl
Posts: 412
|
Re: 2011 txt electrical gremlin
The charge disable is a separate pin in the controller. It's not wired like a typical 36 volt pds. This is 48 volt model.
|
08-27-2014, 09:07 AM | #13 |
Not Yet Wild
Join Date: Aug 2014
Posts: 5
|
Re: 2011 txt electrical gremlin
Wow! I was excited to get to work this morning and check out the charger inhibit! Then I looked and realized that I had replaced that too, about 6 months ago.... On my 1313 its says charger inhibit off. That's not it. I mentioned that I get about 12v through the rear hub???? When I remove A2 on motor it clears. I've checked cable (bare cart/no body) to controller, no damage. Does anyone think this is related to the no run/solenoid issue? I get 3.4 v across solenoid SOL/SOL-. 49.5v each side+ key Switch side. 46.1v to controller (blue wire) my micro switch gets 49.5 v on one side, 49.5 v on other side (only when pedal is depressed. On my 1313 I get VPS OFF, what's that? My field current is .7 amps. Arm current, Arm pwm, field pwm all @ 0%
|
08-27-2014, 10:05 AM | #14 |
Not Yet Wild
Join Date: Aug 2014
Posts: 5
|
Re: 2011 txt electrical gremlin
Not charger inhibit, all replaced. 1313 shows it in "off" position.
|
Tags |
txt |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
2011 TXT question | Gas EZGO | |||
electrical problem st sport 2+2 2011 | Gas EZGO | |||
Electrical Gremlin! Any ideas!? | Gas EZGO |