|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
05-29-2010, 03:03 PM | #1 |
Not Yet Wild
Join Date: May 2010
Posts: 24
|
'Drive' (g29) qustions
I just took delivery of an '07 G29. I have a couple of questions.
The brake pedal seems to travel a couple of inches before it engages. If you push it to the floor, the cart will skid to a stop. I did not see any adjustments for the brake cable to tighten it up. I also understand that this is a sealed wet brake. Is there any adjustments for this type of brake? This cart has good torque, however my top speed is 12 mph. I would like to get the 19 that has been advertised. Is there a way to code the cart for that? Thanks! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-29-2010, 03:38 PM | #2 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: 'Drive' (g29) qustions
All the way at the bottom 8-9 it shows you how to adjust it -
Post up some pics, have fun with it http://www.yamahagolfcar.com/partsan...rsmanuals.aspx |
05-29-2010, 04:02 PM | #3 |
Not Yet Wild
Join Date: May 2010
Posts: 24
|
Re: 'Drive' (g29) qustions
Cool! Thanks!
|
05-29-2010, 04:46 PM | #4 |
Not Yet Wild
Join Date: May 2010
Posts: 24
|
Re: 'Drive' (g29) qustions
grrr. rusty cable in there. I got some of the play out, but I need a better wrench to get leverage over the rusty threads. Maybe give the penetrate time to work.
|
05-29-2010, 09:41 PM | #5 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: 'Drive' (g29) qustions
Yeah they get a little dirty and rusty down there, just spray it and let it soak
Where's the pics of the cart-- |
05-30-2010, 07:08 AM | #6 |
Not Yet Wild
Join Date: May 2010
Posts: 24
|
Re: 'Drive' (g29) qustions
I will get some pics up today. So, looks like it should be programmable. Does anyone know what the max speed is on a stock cart? Factory is apparently 12 mph.
|
05-30-2010, 10:10 AM | #7 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: 'Drive' (g29) qustions
Yes a Yamaha Dealer can program your computer. They can set the "Regen" kick in point to be at a higher speed. If you want 19 mph, you will need to purchase the "PTV" upgrade. It is really a factory code they will use for programing your car, but the rules to purchase say, you must have head and tailites, a horn and special reflectors. You should also be able to buy a aftermarket "high speed motor" and get about 23 mph, but you you will loose the regen feature and may loose tourque. I only recomend on flat ground without upgrading controller also. Good luck
|
05-30-2010, 02:37 PM | #8 |
Not Yet Wild
Join Date: May 2010
Posts: 24
|
Re: 'Drive' (g29) qustions
Pics of the cart:
Forgot to mention, but evident in the battery pic. The cart came equipped with a flow-rite battery water system. Need to get a pump. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Power Drive VS I Q Plus | Electric Club Car | |||
Would like "The Drive" to drive uphill faster | Electric Yamaha | |||
Drive Clutch | Gas EZGO | |||
First Drive. | Gas Club Car |