|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
04-24-2018, 10:50 PM
|
#1 |
|
Gone Wild
Join Date: Oct 2017
Location: San Diego
Posts: 272
|
Motor install tips/suggestions ?
Ill be installing a B2 tomm morning into my PDS TXT.
Any helpful tips or suggestions would be much appreciated 👍 Thanks |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-25-2018, 05:40 AM
|
#2 |
|
Master of All Things
 Join Date: May 2013
Location: West Columbia, Texas
Posts: 17,995
|
Re: Motor install tips/suggestions ?
before you disconnect any connections....LABLE THEM so that you can ensure they go back to the same location.
ENSURE you use a back-up wrench on the motor studs to make sure the posts do not turn when tightening up the nuts. |
|
|
|
|
04-25-2018, 06:14 AM
|
#3 |
|
Gone Wild
Join Date: Jul 2017
Location: Baton Rouge
Posts: 350
|
Re: Motor install tips/suggestions ?
Put some never-seize on the spline shaft before you go back with the new motor. If you don't want to muscle it in there, take the cover off above it and use a ratchet strap to pull it up into place.
Just to save you time, one of the wires on the motor and harness are not going to match. Just match black and white and the two that are left go together. My 3rd wires were green and red. |
|
|
|
|
04-25-2018, 06:41 AM
|
#4 |
|
Gone Wild
Join Date: Jul 2010
Location: Peachtree City, Ga.
Posts: 2,759
|
Re: Motor install tips/suggestions ?
Transfer the spline bumper from the old motor to the new one as the new one probably doesn't come with one.
If you don't see one in the old motor, look again. Probably there but well camouflaged. |
|
|
|
|
04-25-2018, 09:05 AM
|
#5 |
|
Gone Wild
Join Date: Oct 2017
Location: San Diego
Posts: 272
|
Re: Motor install tips/suggestions ?
Good info all around.
Thank you |
|
|
|
|
04-25-2018, 04:50 PM
|
#6 |
|
Gone Wild
Join Date: Oct 2017
Location: San Diego
Posts: 272
|
Re: Motor install tips/suggestions ?
Install went smoothly. All the tips you guys provided were useful and saved me time. Hardest part was separating the motor from the spline. Just took some wiggling / jiggling and it came off.
Got it all buttoned up and drove it. Seems about the same as the stock motor but I hear it will get better as it loosens up with time / miles  |
|
|
|
|
04-25-2018, 04:55 PM
|
#7 |
|
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Motor install tips/suggestions ?
What field map is loaded?
|
|
|
|
|
04-25-2018, 05:26 PM
|
#8 | |
|
Gone Wild
Join Date: Oct 2017
Location: San Diego
Posts: 272
|
Re: Motor install tips/suggestions ?
Quote:
|
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 02 Yamaha G19e Long travel install, suggestions? | Lifted Golf Carts | |||
| 2005 G22 - 23" ok to install and light kit suggestions | Gas Yamaha | |||
| Does anyone have any tips on motor changing? | Electric Club Car | |||
| So what tools, tips, or neat things have you done to help install electric motors? | Garage and Workshop | |||
| ALLTRAX install advise/suggestions needed | Electric EZGO | |||
Linear Mode
