Ezgo PDS problem

Hedger · 04-30-2018, 10:16 PM

I have a PD is that I recently purchased. Batteries are not good but they will hold 38.6 V. When I push the throttle I getting nothing. No solenoid click or anything. Reverse Beeper does work but when I do the diagnostics it just gives me one beep. Anybody have any suggestions?

Sir Nuke · 04-30-2018, 11:49 PM

with no CLICK from the solenoid....you are dealing with a issue in the activation circuit.

Hedger · 05-01-2018, 05:28 AM

Ok, what's the activation circuit?

Sir Nuke · 05-01-2018, 05:54 AM

the highlited (red & blue) wires.....the LITTLE wires.

Wiring Diagram PDS Solenoid Activation Circut.jpg

Hedger · 05-01-2018, 06:05 AM

I guess my question is what do I replace?

Hedger · 05-01-2018, 06:06 AM

How do I check?

Sir Nuke · 05-01-2018, 06:18 AM

first, with the key ON, check all the wires from the pedal and the ignition switch. as all of that has to have power for the solenoid to CLICK

ALSO

using your DVM check continuity of each highlited wire from one point to the other.....

Hedger · 05-01-2018, 06:50 AM

Could it be the ITS ?

Sir Nuke · 05-01-2018, 08:26 AM

Quote:

Originally Posted by Hedger

Could it be the ITS ?

sure, as that is part of the solenoid activation circuit. and probably where I would start.

cgtech · 05-01-2018, 08:38 AM

I would not start by buying parts. And the solenoid can still activate with the ITS unplugged.

04-30-2018, 10:16 PM	#1
Hedger Gone Wild Join Date: Nov 2015 Posts: 479	Ezgo PDS problem I have a PD is that I recently purchased. Batteries are not good but they will hold 38.6 V. When I push the throttle I getting nothing. No solenoid click or anything. Reverse Beeper does work but when I do the diagnostics it just gives me one beep. Anybody have any suggestions?
Hedger Gone Wild Join Date: Nov 2015 Posts: 479

04-30-2018, 11:49 PM	#2
Sir Nuke Master of All Things Join Date: May 2013 Location: West Columbia, Texas Posts: 18,001	Re: Ezgo PDS problem with no CLICK from the solenoid....you are dealing with a issue in the activation circuit.

05-01-2018, 05:28 AM	#3
Hedger Gone Wild Join Date: Nov 2015 Posts: 479	Re: Ezgo PDS problem Ok, what's the activation circuit?
Hedger Gone Wild Join Date: Nov 2015 Posts: 479

05-01-2018, 05:54 AM	#4
Sir Nuke Master of All Things Join Date: May 2013 Location: West Columbia, Texas Posts: 18,001	Re: Ezgo PDS problem the highlited (red & blue) wires.....the LITTLE wires. Wiring Diagram PDS Solenoid Activation Circut.jpg

05-01-2018, 06:05 AM	#5
Hedger Gone Wild Join Date: Nov 2015 Posts: 479	Re: Ezgo PDS problem I guess my question is what do I replace?
Hedger Gone Wild Join Date: Nov 2015 Posts: 479

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

05-01-2018, 06:06 AM	#6
Hedger Gone Wild Join Date: Nov 2015 Posts: 479	Re: Ezgo PDS problem How do I check?
Hedger Gone Wild Join Date: Nov 2015 Posts: 479

05-01-2018, 06:18 AM	#7
Sir Nuke Master of All Things Join Date: May 2013 Location: West Columbia, Texas Posts: 18,001	Re: Ezgo PDS problem first, with the key ON, check all the wires from the pedal and the ignition switch. as all of that has to have power for the solenoid to CLICK ALSO using your DVM check continuity of each highlited wire from one point to the other.....

05-01-2018, 06:50 AM	#8
Hedger Gone Wild Join Date: Nov 2015 Posts: 479	Re: Ezgo PDS problem Could it be the ITS ?
Hedger Gone Wild Join Date: Nov 2015 Posts: 479

05-01-2018, 08:38 AM	#10
cgtech Over This Interview Is... Join Date: Jun 2012 Location: AZ Posts: 17,449	Re: Ezgo PDS problem I would not start by buying parts. And the solenoid can still activate with the ITS unplugged.

Similar Threads
Thread	Forum
EZGO PDS Problem	Electric EZGO
Ezgo charger problem now a cart problem	Electric EZGO
odd problem with our ezgo	Electric EZGO
87 gas ezgo top end run problem	Gas EZGO
EZGO Problem	Electric EZGO