|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-02-2018, 01:51 PM | #1 |
Not Yet Wild
Join Date: Nov 2011
Location: Temple/Killeen, Texas
Posts: 66
|
Ezgo its sensor replacement
I am fairly sure my its is faulty after doing the testing procedures listed here and on scottyb’s site. My question is why is there such a huge price difference in the its from $189 to $289 from local ezgo dealers to $35 on amazon? I don’t want to cheap out but a 700% increase is hard to swallow if it is the same part. Any of you guys know if there is a major difference in the unit? I will spend the $200-$300 if it is a far superior product but if they are comparable I would be an idiot not to buy the $35 one.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-02-2018, 02:02 PM | #2 |
Not Yet Wild
Join Date: Nov 2011
Location: Temple/Killeen, Texas
Posts: 66
|
Re: Ezgo its sensor replacement
I am getting 14 volts at the white wire and 2.5 at the black wire. I even bypassed the to wires to see if I had a broken wire.
|
05-02-2018, 02:13 PM | #3 |
Not Yet Wild
Join Date: Nov 2011
Location: Temple/Killeen, Texas
Posts: 66
|
Re: Ezgo its sensor replacement
a Little history on the problem:
I stretched this cart 36” like my other cart. I cut and stretched the wires one at a time jus like my other cart. All connections were soldered and heat shrinked. Problem started directly after the stretch which caused me to think I had made a bad connection. I ohm tested the wires and all of them tested at 0 ohms which would seem to me that there are no broken connections. |
05-03-2018, 11:56 AM | #4 |
Gone Wild
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,544
|
Re: Ezgo its sensor replacement
I have used the cheaper ones from eBay without any issues.
Sent from my SM-G930R4 using Tapatalk |
05-03-2018, 01:23 PM | #5 |
Not Yet Wild
Join Date: Nov 2011
Location: Temple/Killeen, Texas
Posts: 66
|
Re: Ezgo its sensor replacement
|
05-03-2018, 01:29 PM | #6 |
Gone Wild
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,544
|
Re: Ezgo its sensor replacement
|
05-07-2018, 10:03 AM | #7 |
Not Yet Wild
Join Date: Nov 2011
Location: Temple/Killeen, Texas
Posts: 66
|
Re: Ezgo its sensor replacement
All that and I had forgotten to plug the speed sensor back into the controller. I am a idiot!!
|
05-07-2018, 11:07 AM | #8 |
Gone Wild
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,544
|
Re: Ezgo its sensor replacement
We've all done something similar like that before.
Sent from my SM-G930R4 using Tapatalk |
|
|
Similar Threads | ||||
Thread | Forum | |||
WTB Ezgo Speed Sensor Cable (Without Sensor) | Golf Carts and Parts | |||
ITS sensor replacement | Electric EZGO | |||
WTB: EZGO ITS Sensor | Golf Carts and Parts | |||
Speed Sensor Replacement on an IQ | Electric Club Car | |||
03 ezgo pds speed sensor | Electric EZGO |