|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
05-08-2018, 12:24 PM
|
#1 |
|
Not Yet Wild
Join Date: Mar 2018
Location: Litchfield Park Az
Posts: 15
|
Can I borrow some brains?
The drive shaft on this 92 medalist has come loose, breaking the bearing in the process, how do I remove any of the old bearing housing?
  Sent from my iPhone using Tapatalk |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-08-2018, 12:43 PM
|
#2 |
|
Gone Wild
 Join Date: Feb 2017
Location: Richmond, TX
Posts: 1,026
|
Re: Can I borrow some brains?
Wow!
Some romping and rolling on that axle. Remove the c-clip and pull bearing. May need inside bearing puller. I don't know if bearings are pressed on the axle like a Club Car. |
|
|
|
|
05-09-2018, 08:20 AM
|
#3 |
|
Gone Wild
Join Date: Aug 2014
Location: Duncan Corners
Posts: 905
|
Re: Can I borrow some brains?
Problem started with bearing failure.
inner race is still on axle. 1) remove snap ring. 2) take long bolt and thread i nut and large washer then another nut . this will give you a tool to place behind outer bearing (stuck in axle shaft). 3) place edge of washer behind bearing race and use wrench and hammer to "Pull" bearing out... work around bearing and be patient (and slightly brutal) |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| G1 build thread project 'Beg, Borrow or Steal' | Gas Yamaha | |||
| Does anyone have a IQDM 1311-4404 I can borrow/rent? | Electric Club Car | |||
Linear Mode
