|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-26-2018, 01:41 PM | #1 |
Not Yet Wild
Join Date: Jul 2017
Location: salem ohio
Posts: 29
|
1994 ezgo marathon 36 volt wont move
hi everyone got my next project a 36 volt ezgo marathon. I have 36 to 38.5 volts to all my contacts and controller . just got the motor back from shop and it was rebuilt. my ? is there is a diode on the controller from the b+ to the neg. and is burnt up so will that make the motor not run when I hit pedal ?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-26-2018, 02:57 PM | #2 |
Gone Wild
Join Date: Aug 2016
Posts: 612
|
Re: 1994 ezgo marathon 36 volt wont move
Are you getting a solenoid click?
Sent from my iPhone using Tapatalk |
07-26-2018, 04:53 PM | #3 |
Not Yet Wild
Join Date: Jul 2017
Location: salem ohio
Posts: 29
|
Re: 1994 ezgo marathon 36 volt wont move
yes it clicks and micro switch is working too .
|
07-28-2018, 03:36 PM | #4 |
Not Yet Wild
Join Date: Jul 2017
Location: salem ohio
Posts: 29
|
Re: 1994 ezgo marathon 36 volt wont move
ok put new diode on controller from m- to B + and still nothing. when I hit pedal I got solenoid clicking and did a volt ck on it and it is working, got power to b+ at 37,5 volts and at m- I got around 4.6 volts got 37.6 going to motor and just had it rebuilt. could it be the controller or maybe the speed sensor in the little silver box. micro relay is also getting the rite volts when hit peddle. any suggestions ?
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Ezgo marathon wont move | Electric EZGO | |||
1992 ezgo marathon golf cart wont move | Gas EZGO | |||
ezgo 92 marathon w/ curtis 1204 wont move what do i check first, order of eliminatin? | Electric EZGO | |||
1995 Ezgo 36 volt wont move | Electric EZGO | |||
ezgo 36 volt wont move | Electric EZGO |