|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-28-2018, 08:14 PM | #1 |
Not Yet Wild
Join Date: Aug 2016
Posts: 29
|
SLOW DCS after XCT48400 upgrade
I just upgraded the stock controller on my 97 DCS cart to an XCT48400 from ScottyB. Cart runs but jerks as little bit when not taking off at full throttle. Plus my top speed is the same whopping 13mph that I had before. Contoller starts up fine, 4 flashes green then solid indicating that it is set for (and I am assuming sees) the ITS sensor. Could this still be the culprit. I just found out that DCS carts do not have a speed sensor, so that rules that out. Any help would be appreciated.
Thanks! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-28-2018, 08:30 PM | #2 |
Not Yet Wild
Join Date: Aug 2016
Posts: 29
|
Re: SLOW DCS after XCT48400 upgrade
I also just saw on cartsunlimited that Alltrax controllers after 01/1/17 need no resistor or diode. Wouldn't seem to cause a problem (at least the diode) but just curious.
Thanks ! |
08-28-2018, 08:34 PM | #3 |
Gone Wild
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,544
|
Re: SLOW DCS after XCT48400 upgrade
Check battery voltage. At rest and under a load. A DCS cart should run at least 18-20 mph with that controller.
Sent from my SM-G930R4 using Tapatalk |
08-29-2018, 05:27 PM | #4 |
Resident Curmudgeon
Join Date: Oct 2011
Posts: 1,279
|
Re: SLOW DCS after XCT48400 upgrade
Need to see what code it's flashing when it runs, best done on jackstands. My guess is solenoid welded code, if you used a resistor/diode, as this is done internally by the XCT
|
08-29-2018, 08:13 PM | #5 |
Gone Wild
Join Date: Apr 2017
Location: SE TN
Posts: 2,226
|
Re: SLOW DCS after XCT48400 upgrade
If no speed sensor uncheck the speed limit box in the software. If you haven't already
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Alltrax XCT48400 & 200 HD solenoid | Golf Carts and Parts | |||
Alltrax XCT48400 IQ or TXT48 $300 | Golf Carts and Parts | |||
Alltrax XCT48400 PDS Setting Questions | Electric EZGO | |||
cc slow to rev since upgrade | Gas Club Car | |||
91 ez-go slow after upgrade | Electric EZGO |