|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-04-2018, 07:50 PM | #1 |
Gone Wild
Join Date: Sep 2016
Location: Ludington Michigan
Posts: 168
|
PDS Run/Tow switch
I am only getting battery voltage from pin 1 of the J3 run/tow switch. Pin 2 will show voltage when switched on but pin 3 and 4 have nothing. Obviously the power is being suppled by the controller but I assume the power is related to another thing along the way? This all started when I was working around the dash/key switch area and now I have a dead cart.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-04-2018, 08:38 PM | #2 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: PDS Run/Tow switch
Quote:
Here is a drawing showing the voltage path(s) through a stock PDS controller |
|
09-04-2018, 08:48 PM | #3 |
Gone Wild
Join Date: Sep 2016
Location: Ludington Michigan
Posts: 168
|
Re: PDS Run/Tow switch
Thanks! I assume the controller is bad but I want to make sure whatever caused it to go bad is fixed before I hook up a new one! This will help.
|
06-12-2023, 09:03 AM | #4 | |
Not Yet Wild
Join Date: May 2023
Posts: 9
|
Re: PDS Run/Tow switch
Quote:
|
|
06-12-2023, 09:09 AM | #5 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,146
|
Re: PDS Run/Tow switch
All 4 should have pack voltage when the switch is on.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Reversing Switch, Directional Key Switch, & Starter Circuits | Gas Columbia ParCar | |||
forward/reverse switch change to toggle switch | Electric Club Car | |||
2009 Precedent run/tow toggle switch replaced with keyed switch | Electric Club Car | |||
Just got a G9 need to know how to wire ignition switch to push pull switch ASAP! | Gas Yamaha |