Curtis 1311-3301

[Peth0201]

I am currently getting into building carts. I decided to purchase a used Curtis 1311-3301 Dealer controller. I purchased a Molex four pin connection cable for club car.

I have two Club Car Precedents. One is an Excel and the other is an IQ. I've connected the programmer to both carts, and everything seems to boot up nicely.

When I get to the screen, however, there is no "program" menu. My only options are:

Monitor
Faults
Functions
Information
Programmer Setup

On every YouTube video I see, a "program" menu appears where you can dig into the settings of the controller.

Any club car guys out there? Do I need to do something to the programmer?

Appreciate any help!

[Peth0201]

Bump

[Peth0201]

Any club car techs out there?

[kgsc]

Not a club car guy but the 3301 is a dealer level so not sure what functionality it has. May be for just monitoring.

[PingEye3]

I have the 1313-4401 OEM and it has programing mode, but on stock CC controllers, nothing to really program. Used for diagnosis mostly. Now, plug it into a Curtis 1268 400A and there are over 60 parameters for programming. Very useful there. And very useful on the RXV with the Curtis controller and EZGO adapter.

[Peth0201]

Thanks, all! After reading your feedback, I was told by Curtis the 1313-4431 would be more successful with older CC Precedents. @PingEye - Have you tried to program an older CC?

The precedents are an '06 and '10.