295 or 350 ???

scottyb · 09-30-2009, 06:38 PM

Quote:

Originally Posted by crash12888

Can you take the rubber from the new one and put it on the old one?

Nice save, Crash!

Not so EZGO · 09-30-2009, 06:43 PM

Like I said , the rubber from the new one is too small.

Not so EZGO · 09-30-2009, 06:45 PM

Can you tell what kind of cart mine is from the pic? TXT ?

scottyb · 09-30-2009, 06:56 PM

Yep txt with a box

scottyb · 09-30-2009, 06:58 PM

Is the steering box mounted on the front axle or up on the body? 2001 was the change year.

tonyton · 09-30-2009, 07:06 PM

The 350 uses the straight one. The bent one is supposed to be a 94 up 295. Which one fits yours?

mikesmotortoys · 09-30-2009, 07:11 PM

Where did you buy the new dip stick from? Here is the page from my Shop EZGO site. Both engines use the SAME dip stick...

http://www.shopezgo.com/products/Oil...and-11HP).html

tonyton · 09-30-2009, 07:29 PM

You need OEM no. 72538G01. That is the straight 350 dipstick. The old 350 and MCI 350 use those.
My book is '07 and it has the bent stick also. it says '94 and up 295. It's p/n is 26593G01. You probably have a 350 motor in it. I have an older and new 350 and they use the same straight stick. The bent one does exist. What's your description for that number say, Mike?

mikesmotortoys · 09-30-2009, 07:39 PM

26593G01 - says bent dipstick in my parts program for the 295. Doesn't give me a year or any variables...

I have a hard time believing that this MPT / Workhorse has a 295cc in it. I always thought they had a 350cc?

tonyton · 09-30-2009, 07:54 PM

I think it is a 350. If it went to a shop like mine it could have the wrong plate on it!

They all fit.

I don't think you can see the lower stamp while the motor is in. There are no other external differences that I know of. One of those things...
If he really needed to know I suppose he could measure the stroke. That, I think, is different. The 350 has 60 or 61mm stroke.
I can't understand how the same block uses a different dipstick. Unless one of the two uses a larger crankshaft the oil levels would be the same. Doesn't make sense to me

I'll recheck mine tomorow. I have both 350's, but no 295. There are mistakes in the manuals and stuff sometimes. Maybe that's it??

09-30-2009, 06:43 PM	#12
Not so EZGO Not Yet Wild Join Date: Sep 2009 Posts: 27	Re: 295 or 350 ??? Like I said , the rubber from the new one is too small.
Not so EZGO Not Yet Wild Join Date: Sep 2009 Posts: 27

09-30-2009, 06:45 PM	#13
Not so EZGO Not Yet Wild Join Date: Sep 2009 Posts: 27	Re: 295 or 350 ??? Can you tell what kind of cart mine is from the pic? TXT ?
Not so EZGO Not Yet Wild Join Date: Sep 2009 Posts: 27

09-30-2009, 06:56 PM	#14
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,419	Re: 295 or 350 ??? Yep txt with a box

09-30-2009, 06:58 PM	#15
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,419	Re: 295 or 350 ??? Is the steering box mounted on the front axle or up on the body? 2001 was the change year.

09-30-2009, 07:06 PM	#16
tonyton Gone Wild Join Date: Jan 2009 Location: Alabama Posts: 2,120	Re: 295 or 350 ??? The 350 uses the straight one. The bent one is supposed to be a 94 up 295. Which one fits yours?

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

09-30-2009, 07:11 PM	#17
mikesmotortoys Gone Wild Join Date: Mar 2008 Location: Rockwall, Texas (Dallas / Ft. Worth) Posts: 7,077	Re: 295 or 350 ??? Where did you buy the new dip stick from? Here is the page from my Shop EZGO site. Both engines use the SAME dip stick... http://www.shopezgo.com/products/Oil...and-11HP).html
	www.MIKESMOTORTOYS.com www.EZGOPARTSONLINE.com Factory EZGO - Bad Boy Buggy - Dixie Chopper Mowers

09-30-2009, 07:29 PM	#18
tonyton Gone Wild Join Date: Jan 2009 Location: Alabama Posts: 2,120	Re: 295 or 350 ??? You need OEM no. 72538G01. That is the straight 350 dipstick. The old 350 and MCI 350 use those. My book is '07 and it has the bent stick also. it says '94 and up 295. It's p/n is 26593G01. You probably have a 350 motor in it. I have an older and new 350 and they use the same straight stick. The bent one does exist. What's your description for that number say, Mike?

09-30-2009, 07:39 PM	#19
mikesmotortoys Gone Wild Join Date: Mar 2008 Location: Rockwall, Texas (Dallas / Ft. Worth) Posts: 7,077	Re: 295 or 350 ??? 26593G01 - says bent dipstick in my parts program for the 295. Doesn't give me a year or any variables... I have a hard time believing that this MPT / Workhorse has a 295cc in it. I always thought they had a 350cc?
	www.MIKESMOTORTOYS.com www.EZGOPARTSONLINE.com Factory EZGO - Bad Boy Buggy - Dixie Chopper Mowers

09-30-2009, 07:54 PM	#20
tonyton Gone Wild Join Date: Jan 2009 Location: Alabama Posts: 2,120	Re: 295 or 350 ??? I think it is a 350. If it went to a shop like mine it could have the wrong plate on it! They all fit. I don't think you can see the lower stamp while the motor is in. There are no other external differences that I know of. One of those things... If he really needed to know I suppose he could measure the stroke. That, I think, is different. The 350 has 60 or 61mm stroke. I can't understand how the same block uses a different dipstick. Unless one of the two uses a larger crankshaft the oil levels would be the same. Doesn't make sense to me I'll recheck mine tomorow. I have both 350's, but no 295. There are mistakes in the manuals and stuff sometimes. Maybe that's it??