Electric EZGO speed problem...100% or nothing

scottyb · 03-21-2011, 08:27 PM

Yeah, sorry. Um wacky #s did you put the leads on the ITS module wires the white and the pack neg. to get those readings with the key on, F&R in gear, and the cart hopefully on jack stands...

Moonstalker · 03-21-2011, 08:58 PM

I guess I'm confused on what the ITS module is?

I disconnected the black and white wires from the top of the controller and touched the positive lead to each and the negative to the handiest battery neg terminal.

scottyb · 03-21-2011, 09:02 PM

Okay sorry .... this explains it better, It is located under the floor mat behind the peddle. You can access the white wire at the controller....

scottyb · 03-21-2011, 09:05 PM

Was your cart series? You can probe the molex connector at the controller to test.

KactusKiller · 03-21-2011, 10:33 PM

Easy Scotty, Sloan is new to cart mechanicing. I have been trying to help him and I don't even know what you are talking about so try to make everything as simple in terms as possible so we can work thru it.

scottyb · 03-21-2011, 10:39 PM

OKay, find the white wire at the controller Spot #1 closest to M- on a series cart. probe the terminal with the positive test probe and put the neg probe on the battery pack negative. Key on cart in gear, about .5v at solenoid click and 1.5 v at full throttle... ?

Moonstalker · 03-22-2011, 09:14 AM

Thanks guys, I'm fixing to get a little break and can check this out...stay tuned. I really appreciate the help.

Moonstalker · 03-22-2011, 10:20 AM

Ok I just ran some tests and took some pics of the readings but first I want to show you this pic of the wiring at my controller to make sure it looks right...I'm having issues uploading so I may need to do multiple posts

Moonstalker · 03-22-2011, 10:23 AM

Controller wiring ...

Moonstalker · 03-22-2011, 10:25 AM

Here are the other pics of the readings...

Note: the meter needle only made a slight move(not even to .5v) before stepping on the pedal and getting the solenoid to click. Also, these readings remained the same after the solenoid clicked...no change when I pushed the pedal further.

White wire results...18v

Black wire results...3v

On both of these I put the black probe on the Neg of the closest battery(same battery my controller is wired to)

03-21-2011, 08:27 PM	#11
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,406	Re: Electric EZGO speed problem...100% or nothing Yeah, sorry. Um wacky #s did you put the leads on the ITS module wires the white and the pack neg. to get those readings with the key on, F&R in gear, and the cart hopefully on jack stands...

03-21-2011, 08:58 PM	#12
Moonstalker Not Yet Wild Join Date: Mar 2011 Posts: 22	Re: Electric EZGO speed problem...100% or nothing I guess I'm confused on what the ITS module is? I disconnected the black and white wires from the top of the controller and touched the positive lead to each and the negative to the handiest battery neg terminal.
Moonstalker Not Yet Wild Join Date: Mar 2011 Posts: 22

03-21-2011, 09:05 PM	#14
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,406	Re: Electric EZGO speed problem...100% or nothing Was your cart series? You can probe the molex connector at the controller to test.

03-21-2011, 10:33 PM	#15
KactusKiller Getting Wild Join Date: Dec 2010 Posts: 124	Re: Electric EZGO speed problem...100% or nothing Easy Scotty, Sloan is new to cart mechanicing. I have been trying to help him and I don't even know what you are talking about so try to make everything as simple in terms as possible so we can work thru it.
KactusKiller Getting Wild Join Date: Dec 2010 Posts: 124

03-21-2011, 10:39 PM	#16
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,406	Re: Electric EZGO speed problem...100% or nothing OKay, find the white wire at the controller Spot #1 closest to M- on a series cart. probe the terminal with the positive test probe and put the neg probe on the battery pack negative. Key on cart in gear, about .5v at solenoid click and 1.5 v at full throttle... ?

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

03-22-2011, 09:14 AM	#17
Moonstalker Not Yet Wild Join Date: Mar 2011 Posts: 22	Re: Electric EZGO speed problem...100% or nothing Thanks guys, I'm fixing to get a little break and can check this out...stay tuned. I really appreciate the help.
Moonstalker Not Yet Wild Join Date: Mar 2011 Posts: 22

03-22-2011, 10:20 AM	#18
Moonstalker Not Yet Wild Join Date: Mar 2011 Posts: 22	Ok I just ran some tests and took some pics of the readings but first I want to show you this pic of the wiring at my controller to make sure it looks right...I'm having issues uploading so I may need to do multiple posts
Moonstalker Not Yet Wild Join Date: Mar 2011 Posts: 22

03-22-2011, 10:23 AM	#19
Moonstalker Not Yet Wild Join Date: Mar 2011 Posts: 22	Controller wiring ...
Moonstalker Not Yet Wild Join Date: Mar 2011 Posts: 22

03-22-2011, 10:25 AM	#20
Moonstalker Not Yet Wild Join Date: Mar 2011 Posts: 22	Here are the other pics of the readings... Note: the meter needle only made a slight move(not even to .5v) before stepping on the pedal and getting the solenoid to click. Also, these readings remained the same after the solenoid clicked...no change when I pushed the pedal further. White wire results...18v Black wire results...3v On both of these I put the black probe on the Neg of the closest battery(same battery my controller is wired to)
Moonstalker Not Yet Wild Join Date: Mar 2011 Posts: 22

Similar Threads
Thread	Forum
1989 ezgo electric speed ?	Electric EZGO
94 EZGO Electric - how to increase speed?	Electric EZGO
Ezgo Speed Problem	Electric EZGO
94 ezgo speed problem	Electric EZGO
2002 EZGO PDS speed problem	Electric EZGO