G1 Clutch clearance

Dirk · 06-29-2011, 08:37 AM

Getting some great info! Thanks everyone!

Skarp and Rvrnmfo, think you could put 23x10.5-12 tires under your lift? Have a lead on 4 Carlisle All Trail 4 Ply Tubless Tires with Aluminum rims but wonder if they would be to big for the setup.

sho305 · 06-29-2011, 11:18 AM

If you make the lift, you can make it fit anything. If you have the means to do it they are pretty simple. The front tires have to be moved forward to clear the frame with larger than 20" atv tires. The rear has to be moved back to clear larger than around 22-23s and then you may have to mod behind the wheel, with a G9 the bumper mounting has to be modded but even with a 22 (and not moving the cradle) you have to cut the rocker back ahead of the tire. If I did it again I'd make it all fit 25s I think the front will now it was moved forward about 2", the G1 is similar. When I put the clone in mine pretty sure I will move the cradle back and remount the bumper, 25s would be perfect with the clone power and give more speed.

GMB74 · 06-29-2011, 07:47 PM

A member of this site modded the frame on his G1 so the newer-style clutch would clear the frame when lifted. Here is a pic he posted:

kcnaz · 06-30-2011, 01:00 AM

Quote:

Originally Posted by GMB74

A member of this site modded the frame on his G1 so the newer-style clutch would clear the frame when lifted. Here is a pic he posted:

And he did a great job......

kcnaz · 06-30-2011, 10:28 AM

Quote:

Originally Posted by skarp

Its very easy....if you have a torch!! Look for my post of pics of my frame notched.

Dont make it harder than it is...just get the right clutch for the application!

Stephen

Steve I sent you a message.....do you have an old style cluch left?
Will that old style slip on Dirks output shaft?

Dirk · 06-30-2011, 11:13 AM

Already been talking to Steve, Thanks! Just waiting to hear back.

06-29-2011, 08:37 AM	#11
Dirk Not Yet Wild Join Date: Aug 2010 Location: SE Michigan Posts: 70	Re: G1 Clutch clearance Getting some great info! Thanks everyone! Skarp and Rvrnmfo, think you could put 23x10.5-12 tires under your lift? Have a lead on 4 Carlisle All Trail 4 Ply Tubless Tires with Aluminum rims but wonder if they would be to big for the setup.

06-29-2011, 11:18 AM	#12
sho305 Vegas modded 420 Join Date: Jun 2009 Location: West MI Posts: 15,443	Re: G1 Clutch clearance If you make the lift, you can make it fit anything. If you have the means to do it they are pretty simple. The front tires have to be moved forward to clear the frame with larger than 20" atv tires. The rear has to be moved back to clear larger than around 22-23s and then you may have to mod behind the wheel, with a G9 the bumper mounting has to be modded but even with a 22 (and not moving the cradle) you have to cut the rocker back ahead of the tire. If I did it again I'd make it all fit 25s I think the front will now it was moved forward about 2", the G1 is similar. When I put the clone in mine pretty sure I will move the cradle back and remount the bumper, 25s would be perfect with the clone power and give more speed.

06-30-2011, 11:13 AM	#16
Dirk Not Yet Wild Join Date: Aug 2010 Location: SE Michigan Posts: 70	Re: G1 Clutch clearance Already been talking to Steve, Thanks! Just waiting to hear back.

Similar Threads
Thread	Forum
g14 cylinder clearance	Gas Yamaha
Valve clearance on a 350	Electric Club Car
vanguard airbox clearance	Big Block Talk!
Tire clearance?	Gas Club Car
Clearance Parts	Golf Carts and Parts

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum