|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
11-19-2011, 05:54 AM | #1 |
Not Yet Wild
Join Date: Nov 2011
Posts: 12
|
G22 drive clutch problems
I just put in a plowmans driven clutch kit and it is sweet, but I realize that my 03 G22a drive clutch is shot. All three rollers have at least one flat spot, and they are deep.
I.ve heard that there are some options for rebuild or replacement. Can anyone point me in a good, cost effective, direction. Also what in a commet clutch? Thanks again, |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-19-2011, 06:49 AM | #2 |
Gone Wild
Join Date: May 2011
Location: North East Tn.
Posts: 1,029
|
Re: G22 drive clutch problems
If you look under my post, Help can't get the bolt loose or clutch off, it will explain how to do it. Hope it works out for you!!!!!!!!
PS: I have Plowmans stuff also, it's great. |
11-19-2011, 10:49 AM | #3 |
Not Yet Wild
Join Date: Nov 2011
Posts: 12
|
Re: G22 drive clutch problems
Any tips for what to replace it with, or rebuild. Whats best.
|
11-19-2011, 12:48 PM | #4 |
Raised by coyotes
Join Date: Nov 2008
Location: Central Texas
Posts: 5,658
|
Re: G22 drive clutch problems
|
11-19-2011, 12:51 PM | #5 | |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: G22 drive clutch problems
Quote:
|
|
11-19-2011, 03:17 PM | #6 |
Gone Wild
Join Date: Jan 2008
Location: Covington, TN
Posts: 1,942
|
Re: G22 drive clutch problems
Plowmans also rebuilds them.
|
11-20-2011, 04:13 AM | #7 |
Not Yet Wild
Join Date: Nov 2011
Posts: 12
|
Re: G22 drive clutch problems
Thanks for the link Flintrock. That is what I was looking for.
Does anyone have the specs on the clutch puller for a G22? I would kick my own butt if I spent 40$ on a stinking bolt. What is the thread pitch? What is the length of the unthreaded end? What is the diameter of the unthreaded end? Does the unthreaded end taper or have a stepped diameter? If so what is the major and minor diameter? Thanks a lot |
|
|
Similar Threads | ||||
Thread | Forum | |||
Tips & Hints for installing Clutch Tuning Kit, Removal of Drive Clutch | Gas Club Car | |||
High Altitude Drive Clutch and Drive Belt | Gas EZGO | |||
Is it the Drive Clutch or Drive belt? | Gas EZGO | |||
Drive Electric Problems Mount | Star and Fairplay | |||
Problems during test drive | Gas Yamaha |