Need help!

[Andy4639]

Most of you know I'm a EZGO guy but...I bought a IQ cart and I need some help.

Here is what I have guy's.

I tried everything I knew to getter going no luck. The first thing I found wrong was the #1 solenoid was broke the whole bottom of it had come out of it. Had the motor almost off and bam. Terminal cracked off well almost. Dang, Guess it's time for a PQ build again. The speed senor wires were pulled out of the connector at the controller as well they were to short for the lift and I guess jerked out while riding it. The F-2 cables was short to so that's when I decided to swap it. Oh well.

My big ? is what other than the controller and motor would I have to change to turn it into a series cart. F/R contactor I have also. Can the throttle on the gas pedal be used to run it?
The cart:

[scottyb]

WOW thanks for reminding me why my preference is Ezgo, too

Yes, the throttle input device is an MCOR which is just a 5k-0 pot in a box. Same throttle position indicator device for both series and regen carts... Just like the Ezgo ITS that works for regen and series carts.

Good luck with this one. What's your plans?

[Andy4639]

I have a new 48 volt 400amp programable 4844 old sytle Alltrax for a EZGO ITS cart. I should be able to swap it over to 5k-0 right.
I have another old C/C series motor just stock but works. Take and put them in this cart and have a normal DS C/C right. Get it running then send the motor to PQ. My duaghter is wanting it for the CAW ride in March.
I have all kinds of spare parts with nothing to do with them so I thought why not!
I'll take the IQ controller to PQ also and have Carson check it with his new machine.
If I'm thinking right and reading these schematics right it should work.

[blake80]

I forgot to tell you Andy. I have a CC DS series cart sitting at the house.

[Andy4639]

Originally Posted by blake80

I forgot to tell you Andy. I have a CC DS series cart sitting at the house.

Thanks I do too! I have 3 right now as a matter of fact but one is a customers who doesn't have the money to fix it!

Nobody has a PINK top do they, Andrea want a pink top on it. I told her we would paint it PINK!!!!

[blake80]

I guess what I should have said is. I have cc series cart at home is you want to rob the parts from it to switch Andreas cart over for now sorry, I'm extremely sick and on good drugs

[Andy4639]

No problem man. I have all the parts just have to figue out if I really want to do it I guess!
I thought I was going to throw up this afternoon when she said she wanted a pink top and seats!

[blake80]

Originally Posted by Andy4639

No problem man. I have all the parts just have to figue out if I really want to do it I guess!
I thought I was going to throw up this afternoon when she said she wanted a pink top and seats!

You can man it up a lil and do pink camo If my series cart didn't have that vglide in it. I would probably switch that stuff over to my dads cart

[Andy4639]

There is nothing wrong with a v-glide as long as you stay 48 volts! There a pretty good system just don't like a lot of juice!

blake80,
You can man it up a lil and do pink camo

I hope she don't see this! I just don't think I want anything Pink!
Red my work though!

[blake80]

Originally Posted by Andy4639

There is nothing wrong with a v-glide as long as you stay 48 volts! There a pretty good system just don't like a lot of juice!



I hope she don't see this! I just don't think I want anything Pink!
Red my work though!

She might be ok with red if you add a lot of white to the red before it gets sprayed