Cant get a-arms off front of g16

[Twizted]

Has anyone had this problem? Here is whats happening. I took everything apart the rear 2 bolts pulled right out of the a arms but the front ones wont come out. Took the pics out, the nuts out, sprayed them down with some pb blaster. I can hit these things with a 5 pound sledge and the wont come out. You can turn them wrench but that wont slide out for the life of me ahhh! I about to cut them off with an angle grinder. Its kind of like the are stuck in the bushing of the a-arms tight enough that it rebounds of you hit it so i'm making no lee way.

[spriddle]

More than likely they are stuck in the bushing. Keep them soaked really good for a day and knock the crap out of them with a hammer. Put a block of wood or something behind the area so there is not give when you strike. Do you have an air hammer? They work pretty good but you have to be careful not to damage anything around the area you are working. You may try heating them up as well.

[Twizted]

Yeah, that's what happened. I had to burn the rubber out, heat up the sleeve till is was red hot and air hammer it out. I yiyi!