|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
08-02-2020, 02:37 PM
|
#1 |
|
Not Yet Wild
Join Date: Apr 2019
Posts: 24
|
G16 rear differential install questions
I have a 99 G16. So last week I broke my input shaft:
https://imgur.com/gallery/JpMO25r I took a look at the stickies thread for broken I put shaft but still can’t figure out replacing. I opened the differential and replaced it with a new Dana kit from plowman’s. However I can’t get this to slide back in. I think it has to do with the transmission fork on the bottom left of the last photo. Whether I put the cart and forward reverse or neutral doesn’t seem to matter. Any advice? I’m looking at the service manual but it doesn’t seem to have a guide.  I’ve also tried rebuilding it in the other piece of the differential but each time that fork from the forward / reverse gets in the way. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| EZgo limited slip differential 614756 install | Electric EZGO | |||
| Lift and Rear Spring Install Questions | Electric Club Car | |||
| Differential questions | Electric Club Car | |||
| Club Car DS HD Spring questions Differential support | Gas Club Car | |||
| Rear Differential | Electric EZGO | |||
Linear Mode
