|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
08-06-2018, 07:53 PM
|
#1 |
|
Not Yet Wild
 Join Date: Apr 2009
Location: SC
Posts: 35
|
Really Could Use Some Help with Ignition
97 4/cycle Ezgo 2 cyclinder engine. Cart wouldn’t start found only had spark when I release the pedal. Replaced the Igniter and I now have spark when I first press the pedal and a weaker spark right when I release the pedal. Coil ohms out at 16.6K and 3.6 ohms
Pulser ohms out at 12 ohms also when turning it over I get about.3VAC Looking at the flywheel I don’t see a magnet. The only thing I see is a square cutout about 1/4” width. Anyone have any advice? I’m about to pull my hair out. Oh also I sprayed a little starting fluid in the carb and it fired one time. I don’t have the gas line connected. Just using a inline spark tester. Thanks Keith |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Ignition | Gas EZGO | |||
| Ignition help | Gas EZGO | |||
| Pre MCI ignition and MCI ignition parts compatibility | Gas EZGO | |||
| HEI Ignition | Gas EZGO | |||
| Yamaha G9-Ignition Coil & Ignition Switch-Help | Gas Yamaha | |||
Linear Mode
