Question about wiring from forward/reverse switch

[SpeedyVol]

I am running new 4 gauge wires from my forward/rev. switch to my motor. The wiring diagram that I am looking at is a little light. Can I clarify a few things with somebody that knows?
1997 EZGO TXT non-dcs series cart.

On my forward/rev. switch:
C goes to A2 on the motor
B goes to S2 on the motor
D goes to S1 on the motor
A goes to?????? (not sure about this one)

From the controller, M goes to A1 on motor?
Is M on the controller the only one that goes straight to the motor?
Thanks.

[LostHusker]

Originally Posted by SpeedyVol

I am running new 4 gauge wires from my forward/rev. switch to my motor. The wiring diagram that I am looking at is a little light. Can I clarify a few things with somebody that knows?
1997 EZGO TXT non-dcs series cart.

On my forward/rev. switch:
C goes to A2 on the motor
B goes to S2 on the motor
D goes to S1 on the motor
A goes to?????? (not sure about this one)

From the controller, M goes to A1 on motor?
Is M on the controller the only one that goes straight to the motor?
Thanks.

On my forward/rev. switch:
C goes to A2 on the motor
B goes to S2 on the motor
D goes to S1 on the motor
A goes toB+ of the controller, you also have another wire from B+ to the solenoid

M on the controller is the only one that goes straight to the motor A1

[scottyb]

What happened to the series wiring diagram I gave you when you first asked about this? GO back and look at all your threads the diagram is in one of them. You can print it out and take it out to the garage with you

[SpeedyVol]

Thanks so much for your help guys. The dude I purchased the cart from had it wired wrong. Got that corrected. Now I have 4 gauge wire on the whole cart. It makes a difference!