Wiring turn signal

[Smowat]

I just purchase a tun signal kit for my 2010 Ezgo the dealer assured me it was the correct model but they are closed on the weekend so can't call them to double check. I will do first thing Monday morning but figured maybe someone had come across this problem themselves.

My turn signal kit is a 7 wire has a port for the harness with 5 plugs that plugs in just fine. My issue is there are 2 more cables to plug in one from the harness and one from the solenoid they are supposed to plug into a black and a red which I don't have. Is this the wrong kit for my cart or am I missing the cables? This is a custom cart that has a 12v port in the dash could they have used the cables that I would need for the turn signal for the 12v? Is there any quick fixes?

[Epb]

That appears to be your + & -. I would guess the cables you need were used for the 12v port. You need 12v for your turn signal. I would tap those wires but i wouldnt use both accessories at the same time. Eventually you need to run a separate + from a fuse block with 10 or 15 amp fuse. The neg would be fine to piggy off of. Imo

[Smowat]

So I called the dealership today and thought of share the answer.

So apparently when Ezgo refurbish these carts they add the 12 port and use the +/- from the lighting wiring harness. The dealership recommended just splicing the +/- since the 12v won't pull much a amperage. I picked up the supplies today so I will work on that wiring tonight.

[Epb]

Im glad you have confirmation and can move forward.