|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
|
|
05-29-2017, 09:09 PM
|
#1 |
|
Not Yet Wild
Join Date: May 2017
Posts: 2
|
Ink mark for balancer alignment on G2 crank gear invisibile
Hi, Is there another way to align the balancer to the crank gear if you can't see the ink mark refered to in the repair manual.
Thanks, Mark. |
|
|
|
05-29-2017, 11:23 PM
|
#2 |
|
Sometime's............
 Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: Ink mark for balancer alignment on G2 crank gear invisibile
Here's a picture of what it should look like.
|
|
|
|
|
05-30-2017, 03:18 AM
|
#3 |
|
Gone Wild
Join Date: Apr 2014
Location: Ohio
Posts: 960
|
Re: Ink mark for balancer alignment on G2 crank gear invisibile
I was in the same predicament as you, I also went off the picture, but I did notice on the underside of the gear there was a little ring or circle about an 1/8" in diameter marking the tooth.. good luck on your rebuild..
 |
|
|
|
|
06-04-2017, 07:07 AM
|
#4 |
|
Not Yet Wild
Join Date: May 2017
Posts: 2
|
Re: Ink mark for balancer alignment on G2 crank gear invisibile
Thanks for the picture. After i posted the question i found someone else's thread that said the dot should be pointing at the center of the crank. It would be awful to get it together one tooth off.
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 91 yamaha running it without crank shaft balancer | Gas Yamaha | |||
| Help with crank and balancer spacers | Gas EZGO | |||
| I need crank and balancer shaft spacers | Gas EZGO | |||
| 87 CC Crank Cam Alignment | Gas Club Car | |||
| How To Check Crank for Alignment | Gas EZGO | |||
Hybrid Mode