Lockman1's DS idle setup?

[lockman1]

Originally Posted by soponies

Alright I’ve tried this. The brakes have a very hard time catching in now as if the engine is running too strong. Brakes work fine when black wire is connected so just think the engine is too much. Tried adjusting the idle and turning that screw does nothing at all. Checked to make sure it was the right screw and still, nothing changes by turning it. Any advice?

An idle is an idle... (engine "putt putting" without shutting down when you lift off of the GO pedal)
It doesn't have anything to do with the brakes or how strong or fast the engine is.

Click pic to enlarge...

FE290carb1.jpg

The idle screw is #9... not #15.