easiest way to increase speed on 98 DCS?

Headly46 · 12-26-2008, 04:48 AM

Hello all, Total newbie, first cart here :)

Just bought a 98 EZGO. Thanks to the search function and a little reading, I learn its a DCS. I also learn that DCS seems to be one of the more difficult (or $$) models to increase the speed on :(

This cart will be used 98% for golf purposes (I have ATV's for other fun!) It seems a little slow to me, but it's probably normal for this cart?

I'm looking to get 20ish MPH if possible. What I'm wondering is, can I get a new motor, and use the stock controller and end up with more MPH? or do I need both the motor and controller to achive more speed?

thanks for the help all

Rian

DOOmsman · 12-26-2008, 07:13 AM

Welcome,

Go down to introductions and tell us more about yourself.

roady89 · 12-26-2008, 08:49 AM

You will probly need both to get to those speeds.....might as well convert to 48 volts too.

buckmanmike · 12-26-2008, 10:28 AM

48 volts and an EMP motor should get you there. 4 ga cables would help too. With the EMP motor you can keep your original controller.

roady89 · 12-26-2008, 11:44 AM

Going to 48 volts will require a controller change amongst other things. A lot of people convert DCS carts to series.

buckmanmike · 12-26-2008, 05:10 PM

My bad. Yes controllers are voltage sensitive. You can try just the EMP motor and if thats not enough raise voltage and controller upgrade later. Check out their web site, I believe it states what speeds you can expect with different cart combos.

Headly46 · 12-26-2008, 06:19 PM

Thanks for the input so far guys! Motor seems like a Good place to start since it would have to be upgraded no matter what I suppose

I've not read anything on converting a DCS to a series cart. What all would be entailed? (and ballpark cost?)

Seems like a conversion to 48 volt would be about 1500 (ball park) is this close?

roady89 · 12-26-2008, 08:09 PM

You dont "have to" do the motor first. By far one of the best upgrades is to 48 volts. To run 48 volts you will need to upgrade the controller and of coarse have 48 volts worth of batteries, a 48 volt solenoid and a charger. Check out alltrax and the DCX line of controllers.

The stock motor responds well to the additional voltage. I think a DCS to Series conversion you can use the same motor.

BRS · 12-26-2008, 09:35 PM

Listen to Roady!!!!

rusty · 12-28-2008, 01:43 AM

Welcome to the forum Headly46.......................

12-26-2008, 04:48 AM	#1
Headly46 Not Yet Wild Join Date: Dec 2008 Posts: 5	easiest way to increase speed on 98 DCS? Hello all, Total newbie, first cart here :) Just bought a 98 EZGO. Thanks to the search function and a little reading, I learn its a DCS. I also learn that DCS seems to be one of the more difficult (or $$) models to increase the speed on :( This cart will be used 98% for golf purposes (I have ATV's for other fun!) It seems a little slow to me, but it's probably normal for this cart? I'm looking to get 20ish MPH if possible. What I'm wondering is, can I get a new motor, and use the stock controller and end up with more MPH? or do I need both the motor and controller to achive more speed? thanks for the help all Rian
Headly46 Not Yet Wild Join Date: Dec 2008 Posts: 5

12-26-2008, 07:13 AM	#2
DOOmsman Gone Wild Join Date: Jul 2008 Location: Reddick IL Posts: 11,244	Re: easiest way to increase speed on 98 DCS? Welcome, Go down to introductions and tell us more about yourself.

12-26-2008, 08:49 AM	#3
roady89 nimda Join Date: Jun 2007 Posts: 13,024	Re: easiest way to increase speed on 98 DCS? You will probly need both to get to those speeds.....might as well convert to 48 volts too.
roady89 nimda Join Date: Jun 2007 Posts: 13,024

12-26-2008, 10:28 AM	#4
buckmanmike Gone Wild Join Date: Oct 2007 Location: Snellville, Ga. Posts: 1,304	Re: easiest way to increase speed on 98 DCS? 48 volts and an EMP motor should get you there. 4 ga cables would help too. With the EMP motor you can keep your original controller.

12-26-2008, 11:44 AM	#5
roady89 nimda Join Date: Jun 2007 Posts: 13,024	Re: easiest way to increase speed on 98 DCS? Going to 48 volts will require a controller change amongst other things. A lot of people convert DCS carts to series.
roady89 nimda Join Date: Jun 2007 Posts: 13,024

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

12-26-2008, 05:10 PM	#6
buckmanmike Gone Wild Join Date: Oct 2007 Location: Snellville, Ga. Posts: 1,304	Re: easiest way to increase speed on 98 DCS? My bad. Yes controllers are voltage sensitive. You can try just the EMP motor and if thats not enough raise voltage and controller upgrade later. Check out their web site, I believe it states what speeds you can expect with different cart combos.

12-26-2008, 06:19 PM	#7
Headly46 Not Yet Wild Join Date: Dec 2008 Posts: 5	Re: easiest way to increase speed on 98 DCS? Thanks for the input so far guys! Motor seems like a Good place to start since it would have to be upgraded no matter what I suppose I've not read anything on converting a DCS to a series cart. What all would be entailed? (and ballpark cost?) Seems like a conversion to 48 volt would be about 1500 (ball park) is this close?
Headly46 Not Yet Wild Join Date: Dec 2008 Posts: 5

12-26-2008, 08:09 PM	#8
roady89 nimda Join Date: Jun 2007 Posts: 13,024	Re: easiest way to increase speed on 98 DCS? You dont "have to" do the motor first. By far one of the best upgrades is to 48 volts. To run 48 volts you will need to upgrade the controller and of coarse have 48 volts worth of batteries, a 48 volt solenoid and a charger. Check out alltrax and the DCX line of controllers. The stock motor responds well to the additional voltage. I think a DCS to Series conversion you can use the same motor.
roady89 nimda Join Date: Jun 2007 Posts: 13,024

12-26-2008, 09:35 PM	#9
BRS Master BS'r Join Date: Jul 2007 Location: S. Florida Posts: 1,819	Re: easiest way to increase speed on 98 DCS? Listen to Roady!!!!

12-28-2008, 01:43 AM	#10
rusty Golf Cart Photographer Join Date: Jan 2007 Location: Wichita Falls Texas - My Ride 2010 Club Car Posts: 6,236	Re: easiest way to increase speed on 98 DCS? Welcome to the forum Headly46.......................

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Qickest and easiest way to lower???	On Road Golf Carts!
04 EZGO TXT speed increase???	Electric EZGO
easiest way to bypass govenor 2002 ds	Gas Club Car
Forum Speed Increase	Announcements