Hesitation on 2 stroke

hondarider203 · 03-22-2016, 09:21 PM

It looks like a seal for the shaft is there play in that shaft?

ukpaul · 03-22-2016, 10:27 PM

Just had a look. Nothing that I can tell

hondarider203 · 03-23-2016, 08:47 AM

I'm kinda stumped but that really looks like an oil seal witch could be an issue in itself I would try starting a new thread with that picture and see if anyone else knows since no one seems to be chiming in here. I think we need to figure out what that is then proceed with the current delema

ukpaul · 03-23-2016, 08:55 AM

I believe it's the clutch side crankshaft seal by what I have researched. My question is.....I believe the fuel pump works off the vacuum generated by the motor. Would having this seal work it's way out cause a vacuum loss for the fuel pump ?
Thanks

hondarider203 · 03-23-2016, 09:13 AM

I would think you hit the nail on the head there bud

ukpaul · 03-23-2016, 09:16 AM

I'll let you know. Hopefully do it tonight.

ukpaul · 03-23-2016, 07:43 PM

Well. Pushed the seal back in. No change !
Overhauled fuel pump with a repair kit. Still no change !
This is getting utterly frustrating. For me and you. Lol

hondarider203 · 03-23-2016, 08:25 PM

I will continue to think on it and ask a couple budys tomorrow and se if we come up with anything I my self just pulls my motor apart because of a knocking noise and haven't see much wrong inside

ukpaul · 03-23-2016, 08:28 PM

Thanks man. I do appreciate all your help. I just feel sorry for my boy. I got it for him for Christmas and he's only had a couple of weeks with it without messing up.
Thanks again and good luck with your project.

ukpaul · 03-25-2016, 07:06 PM

Well, I hate to speak too soon but i have a feeling we cracked it.
I checked the points that I paid $100 to have put in and it looked like the gap was a little tight. I opened them up a little, took it around the block and hey, no hesitation/splutter.
Can't believe it was that all this time. I just had too much faith in a guys work.
Thanks for hanging in there with me.
All the best.

03-22-2016, 09:21 PM	#21
hondarider203 Gone Wild Join Date: Dec 2015 Location: Farmdale ohio Posts: 285	Re: Hesitation on 2 stroke It looks like a seal for the shaft is there play in that shaft?

03-22-2016, 10:27 PM	#22
ukpaul Not Yet Wild Join Date: Jan 2016 Location: TN Posts: 30	Re: Hesitation on 2 stroke Just had a look. Nothing that I can tell

03-23-2016, 08:47 AM	#23
hondarider203 Gone Wild Join Date: Dec 2015 Location: Farmdale ohio Posts: 285	Re: Hesitation on 2 stroke I'm kinda stumped but that really looks like an oil seal witch could be an issue in itself I would try starting a new thread with that picture and see if anyone else knows since no one seems to be chiming in here. I think we need to figure out what that is then proceed with the current delema

03-23-2016, 08:55 AM	#24
ukpaul Not Yet Wild Join Date: Jan 2016 Location: TN Posts: 30	Re: Hesitation on 2 stroke I believe it's the clutch side crankshaft seal by what I have researched. My question is.....I believe the fuel pump works off the vacuum generated by the motor. Would having this seal work it's way out cause a vacuum loss for the fuel pump ? Thanks

03-23-2016, 09:13 AM	#25
hondarider203 Gone Wild Join Date: Dec 2015 Location: Farmdale ohio Posts: 285	Re: Hesitation on 2 stroke I would think you hit the nail on the head there bud

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

03-23-2016, 09:16 AM	#26
ukpaul Not Yet Wild Join Date: Jan 2016 Location: TN Posts: 30	Re: Hesitation on 2 stroke I'll let you know. Hopefully do it tonight.

03-23-2016, 07:43 PM	#27
ukpaul Not Yet Wild Join Date: Jan 2016 Location: TN Posts: 30	Re: Hesitation on 2 stroke Well. Pushed the seal back in. No change ! Overhauled fuel pump with a repair kit. Still no change ! This is getting utterly frustrating. For me and you. Lol

03-23-2016, 08:25 PM	#28
hondarider203 Gone Wild Join Date: Dec 2015 Location: Farmdale ohio Posts: 285	Re: Hesitation on 2 stroke I will continue to think on it and ask a couple budys tomorrow and se if we come up with anything I my self just pulls my motor apart because of a knocking noise and haven't see much wrong inside

03-23-2016, 08:28 PM	#29
ukpaul Not Yet Wild Join Date: Jan 2016 Location: TN Posts: 30	Re: Hesitation on 2 stroke Thanks man. I do appreciate all your help. I just feel sorry for my boy. I got it for him for Christmas and he's only had a couple of weeks with it without messing up. Thanks again and good luck with your project.

03-25-2016, 07:06 PM	#30
ukpaul Not Yet Wild Join Date: Jan 2016 Location: TN Posts: 30	Re: Hesitation on 2 stroke Well, I hate to speak too soon but i have a feeling we cracked it. I checked the points that I paid $100 to have put in and it looked like the gap was a little tight. I opened them up a little, took it around the block and hey, no hesitation/splutter. Can't believe it was that all this time. I just had too much faith in a guys work. Thanks for hanging in there with me. All the best.

Similar Threads
Thread	Forum
Hesitation	Gas Club Car
G9 hesitation	Gas Yamaha
Hesitation	Gas EZGO
Hesitation	Electric Club Car
Hesitation	Big Block Talk!