|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
01-15-2010, 10:30 PM | #11 |
Gone Wild
Join Date: Jan 2008
Location: Covington, TN
Posts: 1,942
|
Re: Plan B
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-16-2010, 01:42 PM | #12 |
Not Yet Wild
Join Date: Nov 2009
Location: Czechahoe, TX
Posts: 38
|
Re: Plan B
Thanks yall. The puller threads are not looking good. I couldnt even get the darn thing to screw in. I've pretty much shot the puller when I had my gorilla rage. Also, What exactly is supose to come off? Just the shieve or the shieve and that disk behind it? Threads on the Shieve seem to be ok. Isn't it just a tapered shaft that its on?
|
01-16-2010, 01:52 PM | #13 |
Raised by coyotes
Join Date: Nov 2008
Location: Central Texas
Posts: 5,658
|
Re: Plan B
Yep, it's just a tapered shaft. Clutch and shieve (big disk) should both come off. The threads on the puller thread into the shieve threads and then bottoms out, pulling everything off. Sounds like you have nothing to lose by cleaning up the threads on the puller with the correct die, and trying it again with an impact.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Some plan and some don't have to! Re CC DS | Design Center | |||
Here is my Plan- Solenoid | Electric EZGO | |||
The Plan | Garage and Workshop |