|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-05-2015, 03:44 PM | #11 |
Dum Spiro Spero
Join Date: Jan 2008
Location: Moncks Corner, SC
Posts: 732
|
Re: 91 ezgo need advice!( new controller or convert new style(
Larry, I have a 93 marathon with the stock metal body and I have made 6 pack battery set up for mine between the frame rails. However I had to move my FnR switch the driver side because it would not work any more with batteries there. Also I mounted my Pot Box between the batteries. I only did this because the existing battery tray was rusted and I mounted the controller on the driver side wheel well behind the FnR switch. This was work and if your looking at saving money then this isnt worth the time or money. Because when you move stuff around you may end up buying cables and other odds and ends.
Did you bag your cart? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-22-2015, 10:11 PM | #12 |
Not Yet Wild
Join Date: Jan 2013
Posts: 53
|
Re: 91 ezgo need advice!( new controller or convert new style(
Dang wish i would have seen this before i rebuilt my tray. I like the idea. Yeah my cart is bagged.
|
04-22-2015, 10:13 PM | #13 |
Not Yet Wild
Join Date: Jan 2013
Posts: 53
|
Re: 91 ezgo need advice!( new controller or convert new style(
How come the plastic piece on my front cowl looks different from pics of other marathons i c
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
EZGO 2012 new style controller? | Electric EZGO | |||
1980 g1, wanting to wire old style forward soleoid with new style reverse solenoid, ? | Gas Yamaha | |||
Can I convert from resistor to controller for <$300? | Electric Club Car | |||
How can I convert a driven clutch to a drive-shaft style output? | Design Center | |||
Convert Resistor to Controller? | Electric EZGO |