|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-23-2013, 11:49 AM | #1 |
Not Yet Wild
Join Date: Feb 2012
Location: Dearborn, MI
Posts: 27
|
Brake Drum Washer
When installing my Ausco rear disc brakes I noticed I am missing the inboard brake drum washer (passenger side) highlighted in the image below. Before I tear apart the other side that has one that I can match up does any one know the size? I am not sure what the function of the washer is but am almost certian is there for a reason. Hope I can just go up to the hardware store and pick a new one up.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-23-2013, 01:00 PM | #2 |
Gone Wild
Join Date: Jul 2012
Location: Central FL
Posts: 1,195
|
I'd the pull the other off - even if someone chimes in with what size it is.
During my last build I found its always a good thing to walk into an Ace Hardware and say, "I need one of these". Especially when it comes to washers, they have different inner diameters and well as outter diameters. Good excuse to inspect the other side also :D |
01-23-2013, 01:07 PM | #3 |
Not Yet Wild
Join Date: Feb 2012
Location: Dearborn, MI
Posts: 27
|
Re: Brake Drum Washer
Thanks for the advice. As luck would have it the Ausco brake install is complete on the drivers side. So I will be taking that side apart just to match up the washer unless someone chimes in.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
stuck brake drum | Electric EZGO | |||
G1 brake drum puller | Gas Yamaha | |||
brake drum swap | Electric Club Car | |||
Stuck brake drum | Electric EZGO | |||
I have a busted drum brake... HELP!!! | Electric EZGO |