|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-17-2009, 10:54 PM | #1 |
Getting Wild
Join Date: May 2008
Posts: 126
|
Changing steering housing on a 97 Gas ezgo
Welll my steering has alot of slop in it. I believe the brass bushings are wore out so... I bought one. Is there anything I should know before I try the installed?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-19-2009, 06:18 AM | #2 |
Not Yet Wild
Join Date: Feb 2009
Location: Sunny Florida
Posts: 35
|
Re: Changing steering housing on a 97 Gas ezgo
If the new rack didn't come with tie rod ends, I'd take a look at them too. They will wear out and cause slop.
|
04-19-2009, 07:54 AM | #3 |
Getting Wild
Join Date: May 2008
Posts: 126
|
Re: Changing steering housing on a 97 Gas ezgo
I did buy those but not the internals of the housing. My understanding is the brass bushings usaully cause this.
|
04-20-2009, 12:44 PM | #4 |
Gone Wild
Join Date: Apr 2009
Location: indiana
Posts: 274
|
Re: Changing steering housing on a 97 Gas ezgo
are you talking about the pitman arm bushings?
|
04-20-2009, 12:48 PM | #5 |
Getting Wild
Join Date: May 2008
Posts: 126
|
Re: Changing steering housing on a 97 Gas ezgo
Yes the brass bushings in the housing.
|
04-20-2009, 02:02 PM | #6 |
Gone Wild
Join Date: Apr 2009
Location: indiana
Posts: 274
|
Re: Changing steering housing on a 97 Gas ezgo
well, if there really worn it will transfer to the steering wheel, but not alot. im leaning to the rack and pinion, and definitely check the tie rods
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
NEED a Club Car rearend housing | Golf Carts and Parts | |||
Changing Rearend Oil in ezgo golf cart? | Gas EZGO | |||
Changing Ezgo pds motor 1wire to 3 wire??? | Electric EZGO | |||
changing seals on ezgo golf cart | Gas EZGO |